CATALOG

Explore catalog details to support your evaluation.

Granular  coal based Activated Carbon

Factory Price Coal-Based Granular Activated Carbon for Water Treatment | Sanniu Carbon

This coal-based granular activated carbon is built for liquid-phase water treatment, where a durable granular bed must hold up through repeated contact, backwashing and reloading. Formed from coal into granules, it suits fixed beds and filter vessels rather than single-pass powder dosing. Buyers choose it for repeatable removal of organics, color, taste and odor in process water, weighing carbon cost against total run cost. Reference ranges are confirmed per batch before quotation.

Iodine value: 500 – 1100 mg/gMethylene blue adsorption: ≥ 90 mg/gHardness: ≥ 90 %Particle size: 4 – 40 目
Coal-based granular activated carbonWater treatmentCoal-based activated carbon
Granular  coal based Activated Carbon

Coal-Based Granular Activated Carbon for Water Treatment with Long Service Life and High Hardness

This coal-based granular activated carbon suits water treatment beds where replacement frequency matters. Its 8–30 mesh granules balance hydraulic flow with contact time, and hardness of at least 95% helps the bed withstand repeated backwashing. An iodine value of 900–1050 mg/g indicates substantial accessible capacity for small organic molecules, supporting longer working life between changeouts when mesh, contact time and backwash suit your vessel. Share your target contaminant and flow rate to confirm batch values.

Iodine value: 900 – 1050 mg/gMethylene blue adsorption: ≥ 100 mg/gHardness: ≥ 95 %
Granular activated carbonWater treatmentCoal-based activated carbon
Bulk granular activated carbon produced by Sanniu Carbon

Eco-Friendly Coconut Shell Activated Carbon for Water and Air Treatment

Coconut shell activated carbon is a hard, granular media for water and air treatment, made from a renewable raw material and activated to create a fine pore network suited to small organic molecules, taste, odour and residual chlorine. Judge a grade by the duty it must perform, not by the raw-material name alone. Iodine value, ash, moisture, hardness and particle size all affect selection. This series comes as 4–40 mesh granules with hardness of 95% or higher.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/g
Coconut shell activated carbonWater treatment
Granular Coconut Shell Activated Carbon

Granular Activated Carbon for Drinking Water Treatment: Coconut Shell and Coal-Based Options

Granular activated carbon helps drinking water treatment reduce taste, odour, colour, organics and residual chlorine. Coconut shell carbon offers a dense microporous structure and relatively low ash, while coal-based grades suit larger fixed beds and varied water sources. Selection depends on raw water, contact time, backwash practice and target outlet quality, not a single iodine value. This page covers specification checks and inquiry details, with batch values confirmed before quotation.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/g
Granular activated carbonWater treatmentCoconut shell activated carbon
Granular  coal based Activated Carbon

Coal-Based Granular Activated Carbon for Environmental Engineering | Selection Guide

Coal-based granular activated carbon suits environmental engineering duties where a durable, flowable adsorbent must hold up in fixed beds, filter vessels and packed contactors. Screened granules let water, wastewater or off-gas pass through a settled bed with manageable pressure drop, supporting colour, odour and dissolved organic removal, effluent polishing and gas-phase adsorption. Selection starts from the target compound or colour, flow or batch volume, and acceptable particle size.

Iodine value: 500 – 1100 mg/gMethylene blue adsorption: ≥ 90 mg/g
Coal-based granular activated carbonWater treatmentCoal-based activated carbon
Close-up view of granular activated carbon used for industrial water treatment evaluation.

Long Service Life Granular Activated Carbon for Cyclic Water Treatment

Coconut shell granular activated carbon is built for water treatment beds loaded, backwashed and returned to service repeatedly. Hardness of 95% or higher helps granules resist attrition and limits fines and pressure-drop growth across cycles. Reference ranges for iodine value, moisture and ash frame capacity and bed stability; batch values are confirmed in writing before quotation. Share your treatment target, flow, contact time and mesh size so selection starts from the real duty.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/gHardness: ≥ 95 %
Granular activated carbonWater treatment
Close-up view of granular activated carbon used for industrial water treatment evaluation.

Granular Activated Carbon for Wastewater Treatment: Iodine Value, Hardness and Particle Size Selection Guide

Granular activated carbon for wastewater gives plants a packed bed that holds colour, dissolved organics and odour while water passes through at a controlled contact time. This guide explains how iodine value, methylene blue adsorption, hardness and particle size support selection, and which water conditions—flow, pH, suspended solids and backwash—should be confirmed first. Reference ranges help shortlist a grade; batch values and documents are agreed before quotation.

Iodine value: 500 – 1100 mg/gMethylene blue adsorption: ≥ 90 mg/gHardness: ≥ 90 %Particle size: 4 – 40 目
Granular activated carbonWater treatmentCoal-based granular activated carbon
Close-up view of granular activated carbon used for industrial water treatment evaluation.

Activated Carbon for Textile Dyeing Wastewater Treatment: Selection Guide

Textile dyeing wastewater carries dissolved colour, surfactants and salts that biological stages do not fully remove. Granular activated carbon can act as a polishing or intermediate adsorption step, holding dye molecules in a developed pore network so residual colour and organics are reduced before discharge or reuse. Performance depends on dyestuff type, pH, contact time and competing species, so grade and mesh should match the actual effluent. Confirm these points before quotation.

Iodine value: 800 – 1300 mg/gMethylene blue adsorption: 150 – 280 mg/gHardness: ≥ 85 %
Granular activated carbonWater treatmentWood-based activated carbon
Granular activated carbon

Factory Price Activated Carbon for Water Treatment and Gas Purification | Series Specifications

Granular coconut shell activated carbon for water treatment and gas purification, offered at factory pricing against a written quotation. Its stable granular bed suits drinking water polishing, dechlorination, taste and odor control, and gas-phase adsorption. Compare mesh size, hardness, moisture basis and batch test values, not one headline figure. Share your medium, flow, target values, mesh and packing; we confirm grade, price, quantity and delivery in writing.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/g
Granular activated carbonWater treatment
Close-up view of granular activated carbon used for industrial water treatment evaluation.

Long-Life Granular Activated Carbon for Water Treatment: Selecting Durable Media

Long service life in a water-treatment bed depends on more than one adsorption figure. This granular coconut shell activated carbon suits fixed-bed and pressure-vessel duty, pairing a microporous structure with hardness of 95% or higher to resist attrition and fines during backwashing, handling and transport. Iodine value, methylene blue adsorption and BET surface area together indicate capacity and access for larger organics. Send your treatment target, flow rate, vessel details and mesh cut to confirm a grade and batch data.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/gHardness: ≥ 95 %Particle size: 4 – 40 目
Granular activated carbonWater treatmentCoconut shell activated carbon
Close-up view of granular activated carbon used for industrial water treatment evaluation.

Coal-Based Granular Activated Carbon for Water Treatment: Iodine Value 500–1100 mg/g, Hardness ≥90%

Coal-based granular activated carbon for water treatment is designed for fixed beds and filters, where it must retain its shape through backwashing while capturing dissolved organics. This grade suits environmental engineering duties such as taste, odor and color control and organics polishing. Reference values include iodine value 500–1100 mg/g and hardness ≥90%, with batch data confirmed before quotation. Share your water analysis, flow and mesh needs to discuss the grade direction.

Iodine value: 500 – 1100 mg/gMethylene blue adsorption: ≥ 90 mg/gHardness: ≥ 90 %Particle size: 4 – 40 目
Coal-based granular activated carbonWater treatmentCoal-based activated carbon
Granular activated carbon

Activated Carbon for Water Treatment: Product Selection Guide for Buyers and Engineers

Activated carbon for water treatment removes dissolved organics, colour, taste, odour and residual oxidants from water and process streams. This page explains how pore structure, particle size and contact arrangement affect performance, how granular and powdered forms suit fixed beds or slurry dosing, and which water parameters to confirm before shortlisting a grade. It also outlines the inquiry details that help suppliers check a suitable specification and the documents available for a given batch.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/g
Water treatmentGranular activated carbonCoconut shell activated carbonCoal-based activated carbon