DESCRIPTION

Explore description details to support your evaluation.

Granular coconut shell activated carbon is made from coconut shell and activated to develop a fine micropore structure. In granular form it is typically chosen for fixed-bed water treatment and gas purification, where carbon is held in a vessel or filter and the fluid passes through a stable bed. It suits buyers comparing bulk supply for duties such as drinking water polishing, dechlorination, taste and odor control, and solvent vapor or gas-phase adsorption.

How the Material Fits the Duty

The microporous structure supports adsorption of small molecules and organic compounds from water and gas streams. In liquid service, pores, surface chemistry and contact time work together, so an equal iodine value in two products does not guarantee the same result in a given process. In gas service, humidity, temperature, concentration and residence time affect performance, and gas-phase indicators are comparisons under stated methods, not a promise of any outlet level.

Selection and Inquiry

Confirm what you need to treat, the flow or batch volume, temperature and pH where relevant, and the target indicator. For fixed beds, check particle size against the existing vessel, since finer material can improve contact but raise pressure drop, filtration load and carbon loss. Strength and as-supplied moisture affect handling and effective use per kilogram, so compare quotes on the same moisture basis.

In your inquiry, describe the medium, initial and target values, flow or quantity, expected particle size, packing and delivery location, and any documentation required. Prices, available quantities and lead times are checked by our team against a written quotation or order.

SPECIFICATIONS

Explore specifications details to support your evaluation.

The table below lists series reference ranges for iodine value, methylene blue adsorption and CTC adsorption. These are selection indicators, not a batch guarantee.

Iodine value900 – 1600 mg/g
Methylene blue adsorption135 – 210 mg/g
BET surface area950 – 1200 m²/g
CTC adsorption40 – 99 %
Ash content1 – 5 %
Moisture3 – 10 %
Hardness≥ 95 %
Bulk density0.45 – 0.55 g/cm³
pH value6.5 – 8.5
Particle size4 – 40 目
Heavy metals (food grade)≤ 10 ppm

ADVANTAGES

Explore advantages details to support your evaluation.

The value lies in matching mesh, hardness and documented batch data to your actual water or gas duty, not in a single headline number.

Hardness that protects the bed through backwashing

A reference hardness from 95% upward suits fixed beds that face regular backwash cycles. Confirm the measured hardness of your batch, as handling, transport and regeneration each affect real carbon loss.

Mechanical strength

Mesh size agreed against your existing vessel

Particle size is set per order within the 4-40 mesh reference range, so the grading matches your current bed, flow rate and pressure drop rather than a generic stock cut.

Matched grading

Batch values reported with the test method

Iodine value, moisture, ash and methylene blue adsorption are quoted from the frozen series range and replaced by confirmed batch figures before quotation, each tied to its method and unit.

Traceable figures

Series data for water and gas duties together

Iodine value and methylene blue adsorption support liquid-phase screening, while CTC adsorption is a gas-phase comparison indicator measured under its stated method, so both duties can be reviewed from one sheet.

Dual-duty reference

OUR COMMITMENTS

Six Reasons Industrial Buyers Trust Sanniu Carbon

What we will do at each stage of an enquiry is listed below. Price, available quantity and delivery date are confirmed in writing after review, not assumed from this page.

Duty review before any selection is proposed

We start from your application, treatment target and required product form, then discuss a selection direction. We do not quote a grade until the duty and the form are clear.

Specification scope stated in plain terms

We tell you which specification and documents apply to the grade offered. Batch values and the files we can supply are confirmed before the transaction, not inferred from the series range.

Packaging and moisture protection agreed at order

Packaging specification and moisture-control requirements are checked when the order is confirmed, and the agreed order information governs what is packed and shipped.

Price, quantity and lead time verified by hand

Every price, available quantity and delivery date is confirmed by a person against a written quotation or order. Annual capacity figures do not represent stock or a committed schedule.

Follow-up on use and documents after delivery

We receive and follow up questions about product use or documentation through the agreed contact channel, so any issue is traced back to the batch and its records.

CREDENTIALS

Explore credentials details to support your evaluation.

ISO 9001:2015 certificate for activated carbon sales

ISO 9001:2015

Registrati0n No: 06524Q01338R0S

Beide RoHS test report for an activated carbon sample

Certificate of Analysis

B-R2409C3836

CTI RoHS test report for an activated carbon sample

Certificate of Analysis

Report No. A2260506150101001

UG safety data sheet for activated carbon

Certificate of Analysis

No. 1621112086

CCIC activated carbon sample test report cover

Certificate of Analysis

NO.250100320443888

Shanghai institute wood powder activated carbon report cover

Certificate of Analysis

NO. 1524070087

PACKAGING

Explore packaging details to support your evaluation.

Bag format, liner and pallet treatment are agreed per order, with moisture protection chosen for the shipping route and the receiving plant's handling equipment.

Standard bag with a moisture-barrier liner

The standard export bag carries an inner liner that limits moisture pickup in transit and storage. Bag mass is fixed at order confirmation so receiving weights and handling plans match.

Standard export bag, mass confirmed per order

Bulk bags for larger vessels and fixed beds

Bulk bags reduce handling steps and filling dust where a plant charges a large vessel or filter in one lift. The lifting arrangement and discharge method are agreed against your equipment.

Bulk bag, size confirmed per order

Pallet treatment for export markets

Where the destination requires treated wood packaging, pallet treatment and its supporting document are arranged and named in the order, so customs clearance is not held up by packaging.

Treated pallets where required by destination

Humidity-route protection on request

For humid shipping routes we can discuss added desiccant or sealed packing. The choice depends on transit time and storage conditions, and the agreed option is written into the order.

Option agreed per order

Packing matched to the agreed mesh

Fines and dust behaviour differ across the 4-40 mesh reference range, so packing and handling advice follow the grading actually ordered rather than a general default.

Grading and packing confirmed together

PROCESS

Explore process details to support your evaluation.

Our supply process moves from inquiry review to order confirmation. Each stage is agreed in writing, and product data is tied to the relevant batch.

Share your application and target

Tell us the medium, flow or batch size, target parameter, and current issue so we can identify a suitable carbon type and form.

Review specifications and documents

We state the applicable range of the selected specification and the batch data available for review, so both sides compare on the same basis.

Agree on particle size and packaging

Mesh size is matched to your existing bed or filter, while packaging and moisture protection are confirmed against the order.

Confirm price, quantity and delivery in writing

Pricing, available quantity and lead time are verified by our team and confirmed in a written quotation or order.

Receive support after delivery

Use the agreed contact channel for questions about handling, storage, or documents during use.

DIMENSIONS

Explore dimensions details to support your evaluation.

Bulk density and particle size guide bed volume and vessel loading, while pH, moisture and ash clarify handling conditions. Agree the exact batch values before order confirmation.

Close-up of black granular carbon material

Product form

Granular activated carbon

Granular media for fixed-bed adsorption and filtration. Compare particle size, pressure drop and handling needs.

Close-up of black granular carbon material

Application

Water treatment

Activated carbon selection for water polishing, colour and odour control. Share the water analysis and treatment targets.

FAQ

Explore faq details to support your evaluation.

Answers below help buyers compare factory-price activated carbon for water treatment and gas purification, and prepare the details needed for a series grade quotation.

What makes a factory-price quotation comparable?

Compare quotations on the same grade, particle size, moisture basis and batch specification. A lower headline price can reflect a wider mesh, a wetter as-supplied basis or a different iodine value range. Ask for the agreed specification plan, the test method and the batch value before deciding.

Which specifications should I confirm before ordering?

For water treatment, confirm iodine value, methylene blue adsorption, ash, pH and the mesh range that suits your bed. For gas purification, confirm CTC adsorption, moisture, bulk density and pressure drop. The series reference ranges are a starting point; the batch value is confirmed before quotation.

Why does moisture matter when comparing prices?

Moisture is measured as supplied, so the same mass can contain different amounts of dry carbon. Agree the moisture basis and the unit of measure before comparing cost per tonne. Series moisture ranges from 3% to 10%; the batch result is confirmed on the sample.

How should I choose the mesh size?

Match the mesh range to the existing vessel, filter or adsorber, and to the allowed pressure drop. A finer range may improve contact but can raise pressure drop, dust and handling loss. Series particle size ranges from 4 to 40 mesh, and the final size is agreed per order against your equipment.

What details should an inquiry include?

State the medium or gas to be treated, flow rate or concentration, target specification, required mesh and approximate quantity. For gas duty, add temperature, humidity and pre-treatment; for water, add pH and contact conditions. We then confirm the grade and specification plan, and pricing and delivery are checked by our team.