Sanniu Carbon
Activated carbon products
Compare published sample grades and material forms for industrial adsorption. Open a product to review its specifications and discuss suitability.
Request a quoteCATALOG
Explore catalog details to support your evaluation.
Activated Carbon for Decolorization: Powdered Carbon for Liquid-Phase Color Removal
This powdered activated carbon is made from wood raw material for liquid-phase decolorization of sugar liquors, oils, dyes and similar process streams. The fine powder disperses through the liquid and is removed by filtration, fitting duties where color must be reduced before downstream processing. Series reference figures include an iodine value of 800–1300 mg/g. These are screening references, not a promise for your liquid; batch values are confirmed before quotation.
Activated Carbon for Decolorization: How to Select the Right Grade
Decolorization depends less on a headline adsorption number than on how the carbon behaves in your actual liquor. This wood-based powdered activated carbon comes in a 200–325 mesh range for syrup, oil, dye and chemical streams needing fast dispersion. Reference values include 800–1300 mg/g iodine value and at least 90% caramel decolorization by Method A. These guide shortlisting only; confirm with a trial on your own liquid, and verify batch values before quotation.
Activated Carbon for Textile Dyeing Wastewater Treatment: Selection Guide
Textile dyeing wastewater carries dissolved colour, surfactants and salts that biological stages do not fully remove. Granular activated carbon can act as a polishing or intermediate adsorption step, holding dye molecules in a developed pore network so residual colour and organics are reduced before discharge or reuse. Performance depends on dyestuff type, pH, contact time and competing species, so grade and mesh should match the actual effluent. Confirm these points before quotation.
Wood-Based Activated Carbon for Southeast Asia Water and Air Treatment | Sanniu Carbon
Wood-based activated carbon in granular form is produced for water and air treatment duties across Southeast Asia. Its developed pore structure supports adsorption of dissolved organics, color, odor and trace contaminants, while the granular shape keeps flow steady in fixed beds and vapor-phase units. Share your treatment object, flow rate or concentration, target indicators and required mesh size, and our team confirms the matching grade and applicable documents.
Wood-Based Granular Activated Carbon for Water and Air Treatment
Wood-based granular activated carbon for water treatment and air and gas purification, supplied with batch-tested iodine value, hardness, ash content and particle size for European and North American buyers.
Wood-Based Pelletised Activated Carbon
Wood-Based Pelletised Activated Carbon for liquid-phase decolourisation for sugar syrups, food refining and pharmaceutical purification. Supplied as block and pelletised form with iodine value, particle size and hardness stated per batch, and a 1-5 kg sample available for evaluation.
Wood-Based Powder Activated Carbon
Wood-Based Powder Activated Carbon for liquid-phase decolourisation for sugar syrups, food refining and pharmaceutical purification. Supplied as powder form with iodine value, particle size and hardness stated per batch, and a 1-5 kg sample available for evaluation.
Wood-Based Granular Activated Carbon
Wood-Based Granular Activated Carbon for liquid-phase decolourisation for sugar syrups, food refining and pharmaceutical purification. Supplied as granular form with iodine value, particle size and hardness stated per batch, and a 1-5 kg sample available for evaluation.