DESCRIPTION

Explore description details to support your evaluation.

Decolorization is rarely solved by the highest adsorption number alone. What matters in a sugar liquor, oil, dye bath or chemical stream is whether the carbon can reach the color bodies under your actual contact conditions, remove them without excessive product loss, and be separated cleanly afterward. This decolorization-grade activated carbon is supplied as a fine powder in the 200–325 mesh range, intended for liquid-phase work where fast dispersal and short contact time are useful.

Powdered carbon presents a large external surface to the liquid, so color bodies can migrate into the pore structure quickly when the slurry is properly mixed. The series carries reference ranges of 800–1300 mg/g iodine value, 150–280 mg/g methylene blue adsorption and 900–1500 m²/g BET surface area, with a caramel decolorization reference of at least 90% by Method A. These describe the series, not a guaranteed result in your process: iodine and methylene blue are probe measurements under defined conditions, and caramel decolorization is a comparative laboratory test.

Define the color target first, then the conditions around it: liquor composition, pH and temperature, current and target color, batch size or flow, and whether you dose into a tank or pass liquid through a filter. Finer grinding can speed adsorption but may slow filtration and raise residual fines, so a small trial comparing dose against color reduction and product loss is usually more informative than a single number.

Note that meeting a color target is not by itself proof that COD, specific impurities or regulatory limits are satisfied; those need their own testing under your conditions, and batch values are confirmed before quotation. To discuss a grade, share the liquid being treated, its pH and temperature, current and desired color, batch size or flow, your dosing and filtration setup, preferred mesh size, and planned quantity. Pricing, availability and delivery are confirmed by our team.

SPECIFICATIONS

Explore specifications details to support your evaluation.

Ranges below describe the series reference; batch values are confirmed on the sample before quotation and should be checked against your process conditions.

Iodine value800 – 1300 mg/g
Methylene blue adsorption150 – 280 mg/g
BET surface area900 – 1500 m²/g
CTC adsorption35 – 55 %
Ash content≤ 4.9 %
Moisture≤ 8 %
Bulk density0.35 – 0.5 g/cm³
pH value1 – 5
Particle size200 – 325 目
Caramel decolorization (Method A)≥ 90 %

ADVANTAGES

Explore advantages details to support your evaluation.

Decolorization depends on pore access, contact conditions and batch consistency, not on a single headline figure. These points show what can be reviewed before you commit.

OUR COMMITMENTS

Six Reasons Industrial Buyers Trust Sanniu Carbon

These are working commitments that reflect how inquiries and orders are handled. Price, quantity and delivery are confirmed by our team in writing rather than promised on this page.

Selection support on your duty

We start from the medium, target colour or impurity, pH, temperature, flow or batch size, dosing or fixed-bed method, and filtration limits. With those details we can discuss which grade direction fits.

Specification scope stated clearly

We explain what a quoted specification and its supporting document cover. Batch values and the documents available for a given order are confirmed before the transaction, not assumed from a series range.

Packaging reviewed at order confirmation

Inner liner, bag size, pallet treatment and moisture protection are agreed at order confirmation. Requirements for humid routes can be raised then and matched to the confirmed order information.

Price, quantity and lead time by human review

Available quantity, price and delivery schedule are verified by our team. The binding reference is the written quotation or order both sides confirm, not the annual capacity figure.

Follow-up after delivery

Questions about use or documents are received through the agreed contact channel and followed up. This does not imply a fixed warranty, free sample policy or performance guarantee.

CREDENTIALS

Explore credentials details to support your evaluation.

ISO 9001:2015 certificate for activated carbon sales

ISO 9001:2015

Registrati0n No: 06524Q01338R0S

Beide RoHS test report for an activated carbon sample

Certificate of Analysis

B-R2409C3836

CTI RoHS test report for an activated carbon sample

Certificate of Analysis

Report No. A2260506150101001

UG safety data sheet for activated carbon

Certificate of Analysis

No. 1621112086

CCIC activated carbon sample test report cover

Certificate of Analysis

NO.250100320443888

Shanghai institute wood powder activated carbon report cover

Certificate of Analysis

NO. 1524070087

PACKAGING

Explore packaging details to support your evaluation.

Powdered carbon is light, dusty and moisture-sensitive, so packing choices should suit handling, transport conditions and the feeding point. Options are agreed at order confirmation.

Paper or PE-lined bags for powder

Powdered activated carbon is packed in bags with an inner liner to limit moisture pickup and dust during handling. Bag size and liner type are agreed against your unloading and storage arrangements.

Bag size confirmed at order

Bulk bags for larger volumes

Where a plant handles larger batches, bulk bags reduce the number of units opened and simplify transfer to dosing equipment. The liner and discharge method should be checked against your feeder.

Bulk format on request

Moisture protection for humid routes

Extended sea transport or humid climates can raise moisture in the packed product. Inner liners and sealed units help, and the packing route should be discussed when the destination is known.

Route-specific protection

Pallet and container loading

Bags can be palletised for container loading, with pallet treatment agreed for export destinations. Stacking height and pallet pattern are settled with the confirmed order rather than assumed.

Agreed per shipment

Labels and order documents

Product marking and the accompanying order documents are aligned with the confirmed batch and packing. Any specific labelling requirement should be raised during order confirmation.

Per confirmed order

PROCESS

Explore process details to support your evaluation.

Define the decolorization duty

Specify the liquid, color target, pH, temperature, contact time and filtration setup. These conditions decide how a powder grade should be compared.

Pre-screen the grade range

Check the reference iodine value, methylene blue adsorption and caramel decolorization range, then shortlist grades whose profiles match the duty.

Test on the actual liquor

Run a small trial with real process liquor at the same dosage, temperature, contact and filtration, and compare color removal and filtrate clarity.

Confirm batch specifications

Agree the key metrics, test methods, particle size and moisture basis, and confirm the batch values and documents before quotation.

Plan dosing and handling

Set dosage, slurry preparation, dust control and spent-carbon disposal around your equipment, then reconfirm the grade at scale.

DIMENSIONS

Explore dimensions details to support your evaluation.

Decolorization performance depends on pore structure, particle size and the liquid being treated. Compare grades on the same feed, dose and contact conditions.

Powder activated carbon — sample 1

Product form

Powder activated carbon

Fine powder for batch dosing, decolourisation and short contact-time treatment, where the adsorption rate matters more than bed life.

Wood-based activated carbon — sample 1

Material

Wood-based activated carbon

A mesoporous carbon for decolourisation and the removal of larger colour bodies, typically in food, beverage and pharmaceutical refining.

Food, beverage and refining — sample 1

Application

Food, beverage and refining

Decolourisation and purification in sugar, syrup, edible oil and beverage processing, where colour bodies and off-flavours have to be removed.

FAQ

Explore faq details to support your evaluation.

Practical answers for buyers comparing decolorizing carbons, from test methods and dosing to filtration and batch documentation.

How should we compare the decolorization performance of two activated carbons?

Compare both materials under the same conditions: same liquor or oil, temperature, contact time, dose and filtration. The caramel decolorization value (Method A) is a defined comparative test, not a direct prediction of performance in your sugar syrup, oil or dye bath. A fair trial measures color reduction at equal dose, plus filtration behavior, product loss and any impurity released into the treated liquid.

What determines the right dose for our liquid stream?

Dose depends on the color body and its concentration, the liquor composition, pH, temperature, contact time and the target color. Powders disperse quickly in liquid and are usually evaluated by a dose series on a representative sample, while granular grades suit fixed beds where contact time and bed depth matter. Start from a small set of doses and keep the same mixing and separation steps so results stay comparable.

Which particle form suits decolorization: powder or granular?

Powdered carbon offers fast contact and is convenient for batch treatment, but needs effective solid-liquid separation and can leave fine residue. Granular and columnar grades allow continuous flow through a packed bed, with pressure drop, backwashing and carbon loss as operating factors. Finer particles may improve mass transfer while making filtration harder, so match the form to your existing equipment rather than assuming finer is better.

Can we evaluate a sample before placing an order?

Selection normally starts with a discussion of the medium, process step, target specification, dose or flow, and required particle size. From there the grade and specification plan are confirmed. Batch-specific values and the documents available for a shipment are agreed before the transaction; pricing, available quantity and lead time are confirmed by a person, not quoted from this page.

Why do two carbons with similar iodine values decolor differently?

Iodine value describes adsorption of a small probe under defined test conditions; it is not a measure of every pore or of dye and color-body removal. Pore structure, surface chemistry, ash and soluble matter, particle size and the actual liquor all influence decolorization. Compare candidates on your own liquid and on the same test method, unit and batch basis, and ask which specification items are verified on the batch sample.