Sanniu Carbon
Powder activated carbon
Fine powder for batch dosing, decolourisation and short contact-time treatment, where the adsorption rate matters more than bed life.
Request a quoteDescription
Explore description details to support your evaluation.
Fine powder for batch dosing, decolourisation and short contact-time treatment, where the adsorption rate matters more than bed life.
Powder grades are usually supplied between 200 and 325 mesh and are dosed into the process rather than packed into a column. Filtration or settling steps recover the spent powder.
Selection parameters
Explore selection parameters details to support your evaluation.
These parameters are the starting point; final values follow the agreed specification plan.
Key parameter
Confirm this first, then discuss the rest.
Mesh range: 200 to 325
Operating conditions
Share the feed composition and the target outlet value.
Flow, concentration, contact time
Loading and change-out
Deep and shallow beds call for different particle sizes.
Bed depth and replacement cycle
Supply and packaging
Standard lead time 15 days; stock items 3-5 days.
25 kg bag / 500-1000 kg big bag
Related products
Explore related products details to support your evaluation.
Activated Carbon for Decolorization: How to Select the Right Grade
Decolorization depends less on a headline adsorption number than on how the carbon behaves in your actual liquor. This wood-based powdered activated carbon comes in a 200–325 mesh range for syrup, oil, dye and chemical streams needing fast dispersion. Reference values include 800–1300 mg/g iodine value and at least 90% caramel decolorization by Method A. These guide shortlisting only; confirm with a trial on your own liquid, and verify batch values before quotation.
Activated Carbon for Palm Oil Bleaching: Powdered Wood-Based Grades and Selection Factors
Powdered wood-based activated carbon gives palm oil refiners a practical route to decolorization. Its fine particles disperse readily through oil, so the carbon can be dosed, mixed and filtered out in batch or continuous bleaching lines. The wood-based pore structure supports adsorption of colour bodies and trace impurities that affect oil stability. Refiners should compare adsorption indicators, ash, moisture and pH, then test dosing on their own feedstock before fixing a specification.
Coconut Shell Activated Carbon for Water, Air and Process Purification
Coconut shell activated carbon is a hard, low-dust adsorbent with a dense microporous structure, supplied in powder, granular and columnar forms for water, air and process purification. Powder suits short-contact liquid dosing, granular suits fixed beds and backwashing, and columnar offers low pressure drop for vapour duties. Indicative series values and batch figures are confirmed before quotation.
Bamboo-Based Powder Activated Carbon
Bamboo-Based Powder Activated Carbon for indoor air purification, odour control and humidity buffering. Supplied as powder form with iodine value, particle size and hardness stated per batch, and a 1-5 kg sample available for evaluation.
Nutshell-Based Powder Activated Carbon
Nutshell-Based Powder Activated Carbon for cost-effective purification for drinking water and advanced wastewater treatment. Supplied as powder form with iodine value, particle size and hardness stated per batch, and a 1-5 kg sample available for evaluation.
Wood-Based Powder Activated Carbon
Wood-Based Powder Activated Carbon for liquid-phase decolourisation for sugar syrups, food refining and pharmaceutical purification. Supplied as powder form with iodine value, particle size and hardness stated per batch, and a 1-5 kg sample available for evaluation.
Selection Recommended
Explore selection recommended details to support your evaluation.
Selection starts with the process, not the catalogue.
Share a representative sample
Explain how the sample reflects normal and peak operating conditions.
Agree test methods
Use consistent analytical methods when comparing trial results.
Fix the acceptance rule
Agree sampling and acceptance rules before shipment.
Related articles
Explore related articles details to support your evaluation.
Activated Carbon for Non-Ferrous Metal Refining: Comparing Grades, Impurities and Carbon Loss
Choosing activated carbon for non-ferrous metal refining rarely comes down to one iodine number. In cobalt, nickel, lithium-battery and precious-metal circuits, the carbon must take up organic residues and oils without stripping the metals you are recovering. This guide explains how to read typical indicators, why impurity and fines control need their own element list, and how carbon loss appears in fixed beds, slurry screens and regeneration, plus a fair way to compare grades before ordering.
Activated Carbon for Cobalt and Nickel Electrolyte: Organic Residue, Metal Leaching and Carbon Fines
Activated carbon can polish organic residue from cobalt and nickel electrolyte, but the decision should rest on three checks: whether it removes the target organics, whether it releases metals into the liquor, and whether it sheds fines that blind filters or reach the cathode. This guide explains how to define the duty, read ash and metal data, and compare candidates on the same moisture, contact and analytical basis.
Acid-Washed Wood-Based Activated Carbon for Polysilicon Purification: Verifying Purity Before Purchase
Acid-washed wood-based activated carbon for polysilicon purification is not judged by iodine number alone. What matters is what the carbon may release into a high-value process stream, and whether documentation proves it. This guide explains what acid washing does and does not change, why low ash says little about individual elements, and why total content differs from extraction behaviour. It then gives a verification sequence: define the duty, turn purity into a written element list with methods and limits, and agree sampling and acceptance testing.
Acid-Washed Wood-Based Activated Carbon for Polysilicon: What to Verify Before Buying
Acid-washed wood-based activated carbon for polysilicon purification sounds like a simple purity claim, but the buying decision rests on a defined impurity list and evidence. Clarify which elements matter, whether the concern is total content or a leachable fraction, and how each value was measured. Low ash does not prove every metal is low, and acid washing alone does not make a high-purity grade. Particle size, fines and batch traceability belong in the same specification.
Acid-Washed Wood-Based Powdered Activated Carbon for Polysilicon Purification: Verifying Purity, Ash and Metal Residues
Acid-washed wood-based powdered activated carbon is often proposed for polysilicon purification, but "acid-washed" is a processing route, not proof of purity. This guide explains how to verify what matters: element-level metal residues rather than a single ash figure, test method, unit and medium, soluble species, carbon fines and filtration. It sets out a practical sequence for specification, real-medium trials, batch acceptance and traceability before you commit to a grade.
Acid-Washed Wood-Based Activated Carbon for Polysilicon Purification: What to Verify Before Buying
Acid-washed wood-based activated carbon is often proposed for polysilicon purification, but an acid-wash label or a low ash figure does not prove a grade suits a purity-sensitive process. This guide explains what to verify before buying: individual element results and methods, total versus extraction testing, powder handling and fines separation, adsorption indicators and their limits, and the scope of certificates and sample reports.
Faq
Explore faq details to support your evaluation.
Can powder activated carbon be mixed with another carbon in one bed?
Yes, but when loading in layers keep the particle sizes close to avoid channelling, and record the test data for each layer.
What is the minimum order quantity?
One tonne for normal orders; samples of 1-5 kg can be shipped with freight paid by the customer.
What lead time should we expect?
Around 15 days for regular grades, and 3-5 days for stock items.