Description

Explore description details to support your evaluation.

A mesoporous carbon for decolourisation and the removal of larger colour bodies, typically in food, beverage and pharmaceutical refining.

Phosphoric-acid and physical routes both produce a low-density, low-pH carbon that performs well in caramel and molasses decolourisation.

Selection parameters

Explore selection parameters details to support your evaluation.

These parameters are the starting point; final values follow the agreed specification plan.

Key parameter

Confirm this first, then discuss the rest.

Caramel decolourisation: ≥ 90 %

Operating conditions

Share the feed composition and the target outlet value.

Flow, concentration, contact time

Loading and change-out

Deep and shallow beds call for different particle sizes.

Bed depth and replacement cycle

Supply and packaging

Standard lead time 15 days; stock items 3-5 days.

25 kg bag / 500-1000 kg big bag

Related products

Explore related products details to support your evaluation.

Fine black activated carbon powder

Activated Carbon for Decolorization: Powdered Carbon for Liquid-Phase Color Removal

This powdered activated carbon is made from wood raw material for liquid-phase decolorization of sugar liquors, oils, dyes and similar process streams. The fine powder disperses through the liquid and is removed by filtration, fitting duties where color must be reduced before downstream processing. Series reference figures include an iodine value of 800–1300 mg/g. These are screening references, not a promise for your liquid; batch values are confirmed before quotation.

Iodine value: 800 – 1300 mg/gMethylene blue adsorption: 150 – 280 mg/gCaramel decolorization (Method A): ≥ 90 %
Wood-based activated carbonFood, beverage and refining
Activated carbon processing equipment

Activated Carbon for Decolorization: How to Select the Right Grade

Decolorization depends less on a headline adsorption number than on how the carbon behaves in your actual liquor. This wood-based powdered activated carbon comes in a 200–325 mesh range for syrup, oil, dye and chemical streams needing fast dispersion. Reference values include 800–1300 mg/g iodine value and at least 90% caramel decolorization by Method A. These guide shortlisting only; confirm with a trial on your own liquid, and verify batch values before quotation.

Iodine value: 800 – 1300 mg/gMethylene blue adsorption: 150 – 280 mg/g
Powder activated carbonWood-based activated carbonFood, beverage and refining
Close-up view of granular activated carbon used for industrial water treatment evaluation.

Activated Carbon for Textile Dyeing Wastewater Treatment: Selection Guide

Textile dyeing wastewater carries dissolved colour, surfactants and salts that biological stages do not fully remove. Granular activated carbon can act as a polishing or intermediate adsorption step, holding dye molecules in a developed pore network so residual colour and organics are reduced before discharge or reuse. Performance depends on dyestuff type, pH, contact time and competing species, so grade and mesh should match the actual effluent. Confirm these points before quotation.

Iodine value: 800 – 1300 mg/gMethylene blue adsorption: 150 – 280 mg/gHardness: ≥ 85 %
Granular activated carbonWater treatmentWood-based activated carbon
Laboratory test report document for an activated carbon sample.

Wood-Based Activated Carbon for Southeast Asia Water and Air Treatment | Sanniu Carbon

Wood-based activated carbon in granular form is produced for water and air treatment duties across Southeast Asia. Its developed pore structure supports adsorption of dissolved organics, color, odor and trace contaminants, while the granular shape keeps flow steady in fixed beds and vapor-phase units. Share your treatment object, flow rate or concentration, target indicators and required mesh size, and our team confirms the matching grade and applicable documents.

Iodine value: 800 – 1300 mg/gMethylene blue adsorption: 150 – 280 mg/g
Wood-based activated carbon
Granular activated carbon

Wood-Based Granular Activated Carbon for Water and Air Treatment

Wood-based granular activated carbon for water treatment and air and gas purification, supplied with batch-tested iodine value, hardness, ash content and particle size for European and North American buyers.

Iodine value: 800 – 1300 mg/gMethylene blue adsorption: ≥ 150 mg/g
Granular activated carbonWood-based activated carbon
Wood-based activated carbon in block and pelletised form supplied by Sanniu Carbon

Wood-Based Pelletised Activated Carbon

Wood-Based Pelletised Activated Carbon for liquid-phase decolourisation for sugar syrups, food refining and pharmaceutical purification. Supplied as block and pelletised form with iodine value, particle size and hardness stated per batch, and a 1-5 kg sample available for evaluation.

Iodine value: 800 – 1300 mg/gMethylene blue adsorption: ≥ 150 mg/g
Block and pelletised activated carbonWood-based activated carbonFood, beverage and refining

Selection Recommended

Explore selection recommended details to support your evaluation.

Selection starts with the process, not the catalogue.

Application scene for wood-based activated carbon (1)

Share a representative sample

Explain how the sample reflects normal and peak operating conditions.

Application scene for wood-based activated carbon (2)

Agree test methods

Use consistent analytical methods when comparing trial results.

Application scene for wood-based activated carbon (3)

Fix the acceptance rule

Agree sampling and acceptance rules before shipment.

Related articles

Explore related articles details to support your evaluation.

Activated carbon in sample jars

Acid-Washed Wood-Based Activated Carbon for Polysilicon Purification: How to Verify Purity Before Buying

Acid-washed wood-based activated carbon is often considered for purifying process streams in polysilicon production, where organic residues, oils, and trace contaminants must be controlled. But a low ash figure on a quotation sheet says little on its own. This guide explains how to read acid washing claims, which impurities deserve separate reporting, how a sample report differs from a product certification, and how to agree on a batch acceptance routine before the first delivery.

Wood-based activated carbon
Laboratory workspace for evaluating activated carbon samples before purchase.

Activated Carbon for Cobalt and Nickel Electrolyte Purification: What to Check Before You Specify

Cobalt and nickel electrolyte purification punishes the wrong choice of carbon. A carbon that adsorbs well in a beaker can still shed leached metals, ash, or fines into your liquor, or strip valuable organics you need to keep. This guide explains what iodine number, methylene blue, and ash values actually report, why element-specific leachable data matters more than a single purity claim, and how to set up a fair trial that holds contact time and dose constant.

Granular activated carbonWood-based activated carbonCoal-based activated carbon
Fine black activated carbon powder

Acid-Washed Wood-Based Activated Carbon for Polysilicon Purification: Verifying Purity Before Purchase

Acid-washed wood-based activated carbon for polysilicon purification is not judged by iodine number alone. What matters is what the carbon may release into a high-value process stream, and whether documentation proves it. This guide explains what acid washing does and does not change, why low ash says little about individual elements, and why total content differs from extraction behaviour. It then gives a verification sequence: define the duty, turn purity into a written element list with methods and limits, and agree sampling and acceptance testing.

Wood-based activated carbonPowder activated carbon
Activated carbon in sample jars

Acid-Washed Wood-Based Activated Carbon for Polysilicon: What to Verify Before Buying

Acid-washed wood-based activated carbon for polysilicon purification sounds like a simple purity claim, but the buying decision rests on a defined impurity list and evidence. Clarify which elements matter, whether the concern is total content or a leachable fraction, and how each value was measured. Low ash does not prove every metal is low, and acid washing alone does not make a high-purity grade. Particle size, fines and batch traceability belong in the same specification.

Powder activated carbonWood-based activated carbon
Laboratory workspace for evaluating activated carbon samples before purchase.

Acid-Washed Wood-Based Powdered Activated Carbon for Polysilicon Purification: Verifying Purity, Ash and Metal Residues

Acid-washed wood-based powdered activated carbon is often proposed for polysilicon purification, but "acid-washed" is a processing route, not proof of purity. This guide explains how to verify what matters: element-level metal residues rather than a single ash figure, test method, unit and medium, soluble species, carbon fines and filtration. It sets out a practical sequence for specification, real-medium trials, batch acceptance and traceability before you commit to a grade.

Wood-based activated carbonPowder activated carbon
Screened wood-based carbon granules

Acid-Washed Wood-Based Activated Carbon for Polysilicon Purification: What to Verify Before Buying

Acid-washed wood-based activated carbon is often proposed for polysilicon purification, but an acid-wash label or a low ash figure does not prove a grade suits a purity-sensitive process. This guide explains what to verify before buying: individual element results and methods, total versus extraction testing, powder handling and fines separation, adsorption indicators and their limits, and the scope of certificates and sample reports.

Wood-based activated carbonPowder activated carbon

Faq

Explore faq details to support your evaluation.

Can wood-based activated carbon be mixed with another carbon in one bed?

Yes, but when loading in layers keep the particle sizes close to avoid channelling, and record the test data for each layer.

What is the minimum order quantity?

One tonne for normal orders; samples of 1-5 kg can be shipped with freight paid by the customer.

What lead time should we expect?

Around 15 days for regular grades, and 3-5 days for stock items.