CATALOG

Explore catalog details to support your evaluation.

Bulk granular activated carbon produced by Sanniu Carbon

Eco-Friendly Coconut Shell Activated Carbon for Water and Air Treatment

Coconut shell activated carbon is a hard, granular media for water and air treatment, made from a renewable raw material and activated to create a fine pore network suited to small organic molecules, taste, odour and residual chlorine. Judge a grade by the duty it must perform, not by the raw-material name alone. Iodine value, ash, moisture, hardness and particle size all affect selection. This series comes as 4–40 mesh granules with hardness of 95% or higher.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/g
Coconut shell activated carbonWater treatment
Granular Coconut Shell Activated Carbon

Granular Activated Carbon for Drinking Water Treatment: Coconut Shell and Coal-Based Options

Granular activated carbon helps drinking water treatment reduce taste, odour, colour, organics and residual chlorine. Coconut shell carbon offers a dense microporous structure and relatively low ash, while coal-based grades suit larger fixed beds and varied water sources. Selection depends on raw water, contact time, backwash practice and target outlet quality, not a single iodine value. This page covers specification checks and inquiry details, with batch values confirmed before quotation.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/g
Granular activated carbonWater treatmentCoconut shell activated carbon
Granular Coconut Shell Activated Carbon

Activated Carbon for Gold Extraction: Coconut Shell Grades for Carbon-in-Leach and Carbon-in-Pulp Circuits

Coconut shell granular activated carbon suits gold recovery circuits where carbon is pumped, screened and eluted repeatedly. In carbon-in-leach and carbon-in-pulp flows, grains adsorb dissolved gold complexes onto internal pore surfaces, then release them during elution. Hardness and particle size consistency matter as much as porosity, because fractured grains form fines that pass screens and carry gold out. Compare hardness on the same size fraction and match mesh range to your screens.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/g
Granular activated carbonGold recovery by CIL and CIPCoconut shell activated carbon
Close-up view of granular activated carbon used for industrial water treatment evaluation.

Long-Life Granular Activated Carbon for Water Treatment: Selecting Durable Media

Long service life in a water-treatment bed depends on more than one adsorption figure. This granular coconut shell activated carbon suits fixed-bed and pressure-vessel duty, pairing a microporous structure with hardness of 95% or higher to resist attrition and fines during backwashing, handling and transport. Iodine value, methylene blue adsorption and BET surface area together indicate capacity and access for larger organics. Send your treatment target, flow rate, vessel details and mesh cut to confirm a grade and batch data.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/gHardness: ≥ 95 %Particle size: 4 – 40 目
Granular activated carbonWater treatmentCoconut shell activated carbon
Coconut Shell Activated Carbon

Activated Carbon for Gold Extraction: Coconut Shell Grades for Carbon-in-Pulp and Carbon-in-Leach Circuits

Coconut shell granular activated carbon recovers dissolved gold from cyanide pulp in carbon-in-pulp and carbon-in-leach circuits. Hard, dense granules withstand repeated pumping, screening and elution, while a largely microporous structure suits the small gold cyanide complex. Selection starts from the circuit: pulp density, pH, cyanide regime and target carbon loading shape the grade that fits. Review particle size, hardness, iodine value and impurity profile on the same batch sample before choosing.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/g
Granular activated carbonGold recovery by CIL and CIPCoconut shell activated carbon
Granular activated carbon

Activated Carbon for Water Treatment: Product Selection Guide for Buyers and Engineers

Activated carbon for water treatment removes dissolved organics, colour, taste, odour and residual oxidants from water and process streams. This page explains how pore structure, particle size and contact arrangement affect performance, how granular and powdered forms suit fixed beds or slurry dosing, and which water parameters to confirm before shortlisting a grade. It also outlines the inquiry details that help suppliers check a suitable specification and the documents available for a given batch.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/g
Water treatmentGranular activated carbonCoconut shell activated carbonCoal-based activated carbon
coconut shell activated carbon 4×8 Mesh   Granular

Granular Coconut Shell Activated Carbon for Drinking Water Treatment | Filtration Media

Granular coconut shell activated carbon for drinking water treatment is a hard, low-dust filtration medium for fixed-bed contactors. Water passes through a settled bed, where dissolved organic compounds and taste- and odour-related contaminants are adsorbed onto the carbon surface. Selection depends on water analysis, target parameters, flow rate and contact time, which guide particle size, bed depth and vessel design.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/gHardness: ≥ 95 %Particle size: 4 – 40 目
Granular activated carbonWater treatmentCoconut shell activated carbon
coconut shell activated carbon 4×8 Mesh   Granular

High Iodine Value Coconut Shell Activated Carbon for Water and Gas Purification

This high iodine value activated carbon is a coconut shell granular grade for water and gas purification. It carries an iodine value of 1000 to 1150 mg/g and a BET surface area of 950 to 1200 m²/g. In liquid duty it targets dissolved organics, taste and odour; for vapour-phase work the CTC adsorption range of 40 to 99% guides evaluation. Particle size between 4 and 40 mesh lets buyers suit the grade to a fixed bed. Ranges are references; exact batch values are confirmed before quotation.

Iodine value: 1000 – 1150 mg/gMethylene blue adsorption: 150 – 190 mg/g
Granular activated carbonWater treatmentCoconut shell activated carbon
Bulk granular activated carbon produced by Sanniu Carbon

Coconut Shell Activated Carbon for Food and Beverage Processing | Sanniu Carbon

Coconut shell activated carbon is a hard, dense granular material with a micropore-weighted structure, suited to food and beverage processing: polishing ingredient and cleaning water, treating syrups and liquid intermediates, and controlling odor in beverage and alcohol streams. As a fixed-bed granular grade it withstands repeated backwashing. The table shows series reference values; batch figures and applicable documents are confirmed before quotation. Tell us the medium, flow rate, target impurity level, particle size and quantity for selection confirmation.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/gHardness: ≥ 95 %
Coconut shell activated carbonFood, beverage and refining
Coconut Shell Activated Carbon   Granular For Pharmaceutical Decolorization

Granular Activated Carbon for Drinking Water Treatment: Product Selection Guide

Granular activated carbon for drinking water treatment, made from coconut shell and supplied for fixed-bed filters in municipal and industrial waterworks. Its developed pore structure supports removal of taste, odor and dissolved organics, while good hardness helps the bed withstand backwashing. Review iodine value, methylene blue adsorption, surface area and particle size against your water analysis and treatment goal. Batch values and available documents are confirmed before quotation.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/g
Granular activated carbonWater treatmentCoconut shell activated carbon
Granular activated carbon

Coconut Shell Activated Carbon for Water, Air and Process Purification

Coconut shell activated carbon is a hard, low-dust adsorbent with a dense microporous structure, supplied in powder, granular and columnar forms for water, air and process purification. Powder suits short-contact liquid dosing, granular suits fixed beds and backwashing, and columnar offers low pressure drop for vapour duties. Indicative series values and batch figures are confirmed before quotation.

Iodine value: 900 – 1600 mg/gHardness: ≥ 95 %Methylene blue adsorption: 135 – 210 mg/gParticle size: 4 – 40 目
Coconut shell activated carbonGranular activated carbonPowder activated carbonBlock and pelletised activated carbon
Coconut-shell activated carbon for water filtration

Food-Grade Coconut Shell Granular Activated Carbon for Odor Removal

Food-grade coconut shell granular activated carbon for odor removal in household and industrial applications. Coconut shell gives a hard, microporous carbon suited to retaining small odor molecules and many volatile organic compounds. The granular 900–1600 µm range suits cartridge fill for household units and packed beds in industrial vessels where low pressure drop matters. The series is specified with iodine adsorption at 900 mg/g or more, methylene blue at 135 mg/g or more, CTC at 40 % or more, and BET surface area of 950–1200 m²/g. Ash is specified at 5 % or less, heavy metals at 10 ppm or less and hardness at 95 % or more, supporting food-related and potable water duties and a stable bed. Values shown are series references; batch values, applicable documents, packaging and moisture protection are confirmed before an order. Buyers are invited to share the object being treated, flow or concentration, target specification, particle size and purchase quantity for a selection review.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: ≥ 135 mg/g
Food, beverage and refiningCoconut shell activated carbonAir and gas purification