DESCRIPTION

Explore description details to support your evaluation.

Activated carbon for water treatment is a porous adsorbent used to remove dissolved organic compounds, colour, taste, odour and residual oxidants. Performance depends less on the material name than on how well the pore structure, particle size and contact arrangement suit the stream being treated. This overview explains the general selection logic for granular and powdered carbon; the specification table gives the frozen series values.

How activated carbon works

Carbonised material is activated to open an internal pore network. Small pores provide the surface on which dissolved organic molecules adsorb, while larger pores act as transport channels to reach those sites. Iodine value and methylene blue adsorption are conventional indicators of this capacity, and BET surface area describes the overall internal surface. Because contaminants differ in molecular size and polarity, two carbons with similar iodine values can behave differently in a given water, so shortlisting by a single number is rarely sufficient.

Granular and powdered forms

Granular activated carbon is used in fixed beds and pressure filters, where water passes through a retained bed that is later replaced or reactivated. Finer granules reach equilibrium faster but cost more head loss; coarser granules reduce pressure drop but need a deeper bed or longer contact time. Powdered activated carbon is dosed into a stream, mixed for a defined contact period and removed with the sludge, suiting seasonal taste and odour episodes or sites without a fixed bed.

What to confirm before selection

Confirm the target contaminants and required treated-water quality, the contact arrangement, and feedwater characteristics such as organic load, pH, turbidity and competing species. Also check the particle size range, acceptable pressure drop, backwash rate and fines content for the installed filter, plus handling and packaging needs.

A practical inquiry

To discuss a suitable grade, describe the water source and treatment step, the contaminants to be removed with target concentrations, the flow rate or dose basis, the proposed contact time, the required particle size and the quantity you plan to purchase. These details let us match a series to the duty and confirm applicable specifications and commercial terms in writing.

SPECIFICATIONS

Explore specifications details to support your evaluation.

Specifications below cover iodine value, methylene blue adsorption, surface area, moisture, ash and pH. Batch values are confirmed before quotation.

Iodine value900 – 1600 mg/g
Methylene blue adsorption135 – 210 mg/g
BET surface area950 – 1200 m²/g
CTC adsorption40 – 99 %
Ash content1 – 5 %
Moisture3 – 10 %
Hardness≥ 95 %
Bulk density0.45 – 0.55 g/cm³
pH value6.5 – 8.5
Particle size4 – 40 目
Heavy metals (food grade)≤ 10 ppm

ADVANTAGES

Explore advantages details to support your evaluation.

Key checks that help water-treatment buyers compare activated carbon products before requesting a quotation.

Material series matched to the duty

Coconut shell, coal-based, wood-based and bamboo grades differ in pore structure and hardness, so the series is chosen against the water duty rather than a single headline number.

Series selection

Adsorption indicators stated as ranges

Iodine value and methylene blue adsorption are quoted from the series range, with the batch value confirmed before quotation so planning figures are not treated as fixed.

Adsorption capacity

Physical properties for bed design

Hardness, bulk density and particle size help engineers size vessels, estimate backwash behaviour and judge attrition risk in repeated service cycles.

Bed engineering data

Purity checks relevant to water

pH value, ash content and heavy metals are listed so buyers can align the grade with their own water-quality and handling requirements.

Purity control

OUR COMMITMENTS

Six Reasons Industrial Buyers Trust Sanniu Carbon

How an inquiry is handled from first contact to post-delivery questions, without promising fixed prices, stock levels or delivery dates.

Application review before selection

We confirm the treatment duty, target parameters and required product form first, then discuss which carbon series and grade fit the intended duty.

Scope of specifications explained

Each quoted figure is tied to its specification and supporting document, with applicability stated; batch indicators and available files are confirmed before the transaction.

Order details confirmed in writing

Packaging format and moisture-protection requirements are checked when the order is confirmed, and the agreed written order information governs execution.

Commercial terms verified by staff

Price, available quantity and delivery timing are checked by our team and confirmed through a written quotation or order rather than assumed from this page.

Follow-up after delivery

Usage or documentation questions received through the agreed contact channel are reviewed and followed up, with technical points handled case by case.

CREDENTIALS

Explore credentials details to support your evaluation.

ISO 9001:2015 certificate for activated carbon sales

ISO 9001:2015

Registrati0n No: 06524Q01338R0S

Beide RoHS test report for an activated carbon sample

Certificate of Analysis

B-R2409C3836

CTI RoHS test report for an activated carbon sample

Certificate of Analysis

Report No. A2260506150101001

UG safety data sheet for activated carbon

Certificate of Analysis

No. 1621112086

CCIC activated carbon sample test report cover

Certificate of Analysis

NO.250100320443888

Shanghai institute wood powder activated carbon report cover

Certificate of Analysis

NO. 1524070087

PACKAGING

Explore packaging details to support your evaluation.

Packing is agreed at order confirmation, including bag format and moisture protection for the shipping route.

Moisture protection checked per order

Because activated carbon adsorbs moisture readily, packing and barrier requirements are reviewed with the buyer before the order is finalised, and the confirmed written order governs.

Agreed at order confirmation

Bag format specified by the buyer

The bag type and unit weight are set according to handling equipment and vessel size, and are recorded in the written order so loading and filling can be planned.

Unit weight confirmed per order

Labelling and marking agreed

Product identification, handling marks and any buyer-specified label wording are settled before production packing, keeping the shipped goods traceable to the confirmed order.

Per confirmed order

Shipment preparation planning

Packing and moisture-protection measures are scheduled to match the confirmed delivery arrangement, and any route-specific requirement is raised during order review.

Scheduled with delivery terms

Batch documentation with the goods

Specification and available supporting documents are prepared alongside the packed goods so the receiving team can check the material against the confirmed order.

Issued with the shipment

PROCESS

Explore process details to support your evaluation.

Inquiry to delivery follows six clear steps, keeping specifications, packaging and commercial terms confirmed in writing before supply.

1. Share your treatment scope

Tell us the water or process stream, flow or concentration, target figures, preferred particle size and quantity so we can match the right carbon grade.

2. Align on selection direction

We review your application and treatment goals against available product forms and series, then propose a suitable direction for your evaluation.

3. Confirm specifications and documents

We state the applicable specification range and which reports or certificates apply, with batch values and available files confirmed before the transaction.

4. Agree packaging and protection

At order confirmation we check packaging format and moisture protection requirements, and record them as part of the mutually confirmed order.

5. Verify price, quantity and lead time

Commercial terms are confirmed by our team and set out in a written quotation or order accepted by both parties; this page is not an offer.

6. Receive follow-up support

We answer questions about use or documentation after delivery through the agreed contact channel, helping you handle the material as planned.

DIMENSIONS

Explore dimensions details to support your evaluation.

Particle size, iodine value, methylene blue adsorption and bulk density together shape how this carbon performs in water treatment.

Close-up of black granular carbon material

Application

Water treatment

Activated carbon selection for water polishing, colour and odour control. Share the water analysis and treatment targets.

Close-up of black granular carbon material

Product form

Granular activated carbon

Granular media for fixed-bed adsorption and filtration. Compare particle size, pressure drop and handling needs.

Coconut shell activated carbon — sample 1

Material

Coconut shell activated carbon

A hard, microporous carbon with the highest hardness of the common precursors, widely used for drinking water and point-of-use cartridges.

Close-up of black granular carbon material

Material

Coal-based activated carbon

A versatile material family for industrial treatment, with granular, pellet and powder forms selected to suit the process.

FAQ

Explore faq details to support your evaluation.

What water parameters should I share before choosing a grade?

Tell us what you are treating, the flow rate or contaminant concentration, the target outlet figure, and the particle size your vessels accept. Deciding between coal, coconut, wood, bamboo or nut shell grades follows from those conditions, not from a single headline number.

How do I read the iodine and methylene blue ranges?

Iodine value reflects overall micropore activity; methylene blue adsorption indicates the capacity for larger molecules and colour. For water treatment, read both alongside the application. Batch values are confirmed before quotation, so the supplied ranges are a starting point for grade discussion, not a delivery guarantee.

Which particle sizes suit fixed beds and which suit slurry dosing?

Granular and pelletised grades are the usual choice for packed columns, because they limit pressure drop across the bed. Powdered grades disperse quickly and are dosed into a contacted slurry. The particle size range in the agreed specification plan depends on your vessel, backwash conditions and separation step.

Do you offer samples and batch documentation?

Requests are handled through an inquiry: describe the application and the specification you are testing against, then we confirm sampling and the documents available for your order. Certificates and reports apply to their stated scope; a sample report for one grade is not extended to other grades.

How is the grade confirmed and priced?

We first check the application, water conditions and required product form, then propose a grade and reference specification. Price, available quantity and delivery date are confirmed manually in a written quotation or order. Packaging and moisture-protection requirements are agreed at order confirmation.