Description

Explore description details to support your evaluation.

Granular media for fixed-bed adsorption and filtration. Compare particle size, pressure drop and handling needs.

This page brings together selection guidance and related published products. Use the inquiry page to share operating conditions and confirm the suitable material and specification.

Selection parameters

Explore selection parameters details to support your evaluation.

Prepare these details for a useful discussion.

Treatment objective

Specify the target contaminant and expected outlet quality.

Feed and outlet requirements

Operating conditions

Include flow rate, temperature and equipment constraints.

Process conditions

Material handling

Confirm particle size, loading method and packaging.

Handling and supply

Related products

Explore related products details to support your evaluation.

Granular activated carbon

Granular Activated Carbon for Air Purification: Selecting Iodine Value, Hardness and Mesh for Gas-Phase Service

Granular activated carbon for air purification is a coal-based gas-phase adsorbent for packed beds, adsorption boxes and filter vessels. It targets organic vapours, odours and solvent residues in exhaust streams where gas composition, humidity and flow are known. A defined bed depth makes contact time, pressure drop and replacement intervals plannable. CTC adsorption, iodine value and surface area help screen grades, but none predicts service life alone. Share the gas stream, airflow and allowable pressure drop to confirm batch values.

Iodine value: 500 – 1100 mg/gMethylene blue adsorption: ≥ 90 mg/gHardness: ≥ 90 %
Granular activated carbon for gas-phase dutyAir and gas purificationGranular activated carbon
Granular  coal based Activated Carbon

Coal-Based Granular Activated Carbon for Water Treatment with Long Service Life and High Hardness

This coal-based granular activated carbon suits water treatment beds where replacement frequency matters. Its 8–30 mesh granules balance hydraulic flow with contact time, and hardness of at least 95% helps the bed withstand repeated backwashing. An iodine value of 900–1050 mg/g indicates substantial accessible capacity for small organic molecules, supporting longer working life between changeouts when mesh, contact time and backwash suit your vessel. Share your target contaminant and flow rate to confirm batch values.

Iodine value: 900 – 1050 mg/gMethylene blue adsorption: ≥ 100 mg/gHardness: ≥ 95 %
Granular activated carbonWater treatmentCoal-based activated carbon
Granular Coconut Shell Activated Carbon

Granular Activated Carbon for Drinking Water Treatment: Coconut Shell and Coal-Based Options

Granular activated carbon helps drinking water treatment reduce taste, odour, colour, organics and residual chlorine. Coconut shell carbon offers a dense microporous structure and relatively low ash, while coal-based grades suit larger fixed beds and varied water sources. Selection depends on raw water, contact time, backwash practice and target outlet quality, not a single iodine value. This page covers specification checks and inquiry details, with batch values confirmed before quotation.

Iodine value: 900 – 1600 mg/gMethylene blue adsorption: 135 – 210 mg/g
Granular activated carbonWater treatmentCoconut shell activated carbon
Granular  coal based Activated Carbon

Activated Carbon for Air Purification: Coal-Based Granular Carbon for VOC and Odor Control

Coal-based granular activated carbon for fixed-bed air purification, offered across a reference range of iodine value, CTC adsorption, hardness and mesh size. It suits air streams carrying VOCs, solvent vapour or odour-causing components, where air passes through a granular layer at a defined contact time. Selection should follow actual gas components, concentration, temperature, humidity, airflow and allowable pressure drop, with batch values confirmed on the sample before quotation.

Iodine value: 500 – 1100 mg/gMethylene blue adsorption: ≥ 90 mg/gCTC adsorption: 35 – 95 %Hardness: ≥ 90 %
Granular activated carbon for gas-phase dutyAir and gas purificationGranular activated carbon
Granular  coal based Activated Carbon

Coal-Based Granular Activated Carbon for Long Service Life in Water and Gas Treatment

Coal-based granular activated carbon for water and gas treatment, selected for beds that keep working through repeated backwashing, cycling or regeneration. Hardness of 90% or higher supports mechanical strength, while an iodine value range of 500–1100 mg/g gives a starting point for comparing working capacity. Granular form suits fixed beds, filter vessels and adsorption columns, with 4 to 40 mesh matched to your pressure drop and contact time. Values are confirmed per batch before quotation.

Iodine value: 500 – 1100 mg/gHardness: ≥ 90 %Methylene blue adsorption: ≥ 90 mg/g
Coal-based granular activated carbonGranular activated carbon
Bulk activated carbon granules

Activated Carbon for Solvent Recovery: Coal-Based Granular Grades for VOC Adsorption

Coal-based granular activated carbon for solvent recovery pairs a hard granule with a pore structure that captures organic vapours from air streams. Solvent-laden air passes through a fixed bed, and captured solvent can later be desorbed for reuse. It suits sites using chlorinated or non-chlorinated solvents where recovery beats disposal. Selection starts from the solvent, since concentration, temperature, humidity and airflow shape bed size and cycle life.

Iodine value: 500 – 1100 mg/gMethylene blue adsorption: ≥ 90 mg/g
Granular activated carbon for gas-phase dutyAir and gas purificationGranular activated carbon

Selection Recommended

Explore selection recommended details to support your evaluation.

Selection starts with the process.

Activated carbon in sample jars

Share a representative sample

Explain how the sample reflects normal and peak operating conditions.

Quality control laboratory testing

Agree test methods

Use consistent analytical methods when comparing trial results.

Related articles

Explore related articles details to support your evaluation.

Granular activated carbon

Activated Carbon for Non-Ferrous Metal Purification: Organic Residues, Leachable Impurities and Carbon Fines

Activated carbon can help polish non-ferrous metal process liquors by adsorbing organic residues from solvent extraction reagents, degradation products, and oils. The real selection question is whether a grade can reduce target organics without introducing leachable metals above your limits or shedding carbon fines that contaminate downstream solutions. Judge all three together using the real liquor and consistent test methods.

Granular activated carbon
Laboratory workspace for evaluating activated carbon samples before purchase.

Activated Carbon for Copper Foil Electrolyte Purification: How to Choose and Verify

Copper foil production needs an electrolyte that stays within tight chemical limits, and activated carbon is often used to polish it. But the carbon becomes part of the process, so the choice should follow the duty, not the highest iodine number. This guide explains what carbon can and cannot remove, why iodine value alone cannot select a grade, and how ash, metals, pH, and fines affect risk. It then sets out a fair bench comparison and the documents to verify before a batch decision.

Granular activated carbonCoconut shell activated carbon
Bulk activated carbon granules

Activated Carbon for Cobalt and Nickel Electrolyte Purification: What to Verify Before Selection

Activated carbon is often used as a polishing step in cobalt and nickel electrolyte circuits, removing organic residues, oil carry-over, or colour before electrowinning or crystallisation. This guide explains what to verify: the target organic load, the specific impurity elements and their soluble fractions, fines content, rinsing and residual acidity, and how to compare candidates on your own liquor under the same conditions before ordering.

Granular activated carbonCoal-based granular activated carbon
Laboratory workspace for evaluating activated carbon samples before purchase.

Activated Carbon for Cobalt and Nickel Electrolyte Purification: What to Check Before You Specify

Cobalt and nickel electrolyte purification punishes the wrong choice of carbon. A carbon that adsorbs well in a beaker can still shed leached metals, ash, or fines into your liquor, or strip valuable organics you need to keep. This guide explains what iodine number, methylene blue, and ash values actually report, why element-specific leachable data matters more than a single purity claim, and how to set up a fair trial that holds contact time and dose constant.

Granular activated carbonWood-based activated carbonCoal-based activated carbon
Granular activated carbon

Activated Carbon for Non-Ferrous Metal Purification: What to Check Before You Specify

Non-ferrous metal purification is less about finding the best activated carbon than matching a grade to a specific process stream and proving that match with comparable data. Before you specify, document stream conditions, contact mode, relevant indicators and their limits, contamination risk in purity-sensitive circuits, mechanical behaviour, particle size, regeneration, and document scope. Then turn supplier claims into measurable acceptance criteria.

Gold recovery by CIL and CIPGranular activated carbonCoconut shell activated carbon
Close-up view of granular activated carbon used for industrial water treatment evaluation.

Activated Carbon for Non-Ferrous Metal Refining: Comparing Grades, Impurities and Carbon Loss

Choosing activated carbon for non-ferrous metal refining rarely comes down to one iodine number. In cobalt, nickel, lithium-battery and precious-metal circuits, the carbon must take up organic residues and oils without stripping the metals you are recovering. This guide explains how to read typical indicators, why impurity and fines control need their own element list, and how carbon loss appears in fixed beds, slurry screens and regeneration, plus a fair way to compare grades before ordering.

Granular activated carbonPowder activated carbon