Coal-based granular carbon for VOC recovery

Activated Carbon for Solvent Recovery: Coal-Based Granular Grades for VOC Adsorption

Coal-based granular activated carbon for solvent recovery pairs a hard granule with a pore structure that captures organic vapours from air streams. Solvent-laden air passes through a fixed bed, and captured solvent can later be desorbed for reuse. It suits sites using chlorinated or non-chlorinated solvents where recovery beats disposal. Selection starts from the solvent, since concentration, temperature, humidity and airflow shape bed size and cycle life.

Screened granular grades for solvent vapour adsorption; batch values are confirmed before quotation.

Iodine value
500 – 1100 mg/g
Methylene blue adsorption
≥ 90 mg/g
Request a quote

DESCRIPTION

Explore description details to support your evaluation.

Coal-based granular activated carbon suits solvent recovery because it combines a hard, low-fines granule with a pore structure that captures organic vapours from air streams. Solvent-laden air passes through a fixed bed; the carbon holds the solvent while clean air leaves the vessel, and the captured solvent can later be desorbed for reuse. This makes the material relevant where chlorinated or non-chlorinated solvents and similar volatile organics are handled and recovery is preferred to disposal.

Matching carbon to the vapour stream

Selection starts from the solvent itself, not from one headline number. Concentration, temperature, humidity, airflow and dust or oil mist all affect how much carbon is needed and how long a bed stays useful. Granular coal-based carbon is typically chosen for packed beds where mechanical strength, pressure drop and low dust matter. CTC adsorption is a gas-phase indicator under defined test conditions, not a guarantee for every solvent or recovery unit.

Before ordering

  • Confirm solvent type, concentration range and airflow, as these set the adsorption and desorption design.

  • Check humidity and pre-treatment, since water vapour and oil mist compete for pore space.

  • Agree the mesh cut, because particle size affects pressure drop, bed loading and dust.

  • Allow for desorption conditions and possible capacity loss over repeated cycling.

Specification values are reference ranges; batch values are confirmed before quotation. For a useful inquiry, describe the solvent, concentration and airflow, your desorption method, vessel type, required mesh cut and quantity.

SPECIFICATIONS

Explore specifications details to support your evaluation.

Values below are reference ranges for the granular coal-based series. Confirm iodine value, CTC adsorption, hardness, moisture and the exact mesh cut on the batch sample before quotation.

Iodine value500 – 1100 mg/g
Methylene blue adsorption≥ 90 mg/g
BET surface area650 – 1000 m²/g
CTC adsorption35 – 95 %
Ash content8 – 20 %
Moisture≤ 8 %
Hardness≥ 90 %
Bulk density0.5 – 0.65 g/cm³
pH value7 – 11
Particle size4 – 40 目

ADVANTAGES

Explore advantages details to support your evaluation.

Coal-based granular carbon grades chosen for solvent vapour duty, where pore access, bed stability and change-out logistics affect recovery performance.

Granular form suited to fixed adsorption beds

Granular coal-based carbon packs into vessels and adsorber boxes, letting vapour pass through a defined bed depth. Particle size is fixed per order so the cut matches vessel geometry and pressure drop.

Fixed-bed granular form

Pore structure aimed at solvent vapour uptake

CTC adsorption and BET surface area describe the series reference range for vapour-phase duty. These are comparison values under stated methods, so confirm solvent, concentration and humidity first.

Vapour-phase reference data

Strength and density for repeated cycling

Hardness of 90% or above and bulk density of 0.5-0.65 g/cm³ support bed weight calculations and resist handling losses. Actual attrition depends on the regeneration procedure.

Bed weight and handling

Batch values stated before quotation

Iodine value, moisture, ash, pH and particle size are reported from the batch sample rather than fixed catalogue guarantees, so buyers can compare them with incoming inspection criteria.

Batch-based specification

OUR COMMITMENTS

Six Reasons Industrial Buyers Trust Sanniu Carbon

Our enquiry and order process is set out below so that technical selection, documentation and commercial terms are confirmed in writing before shipment.

Application review before grade selection

We first ask which solvent is being recovered, at what concentration and temperature, and what adsorber is in use. The reply points to the relevant granular coal-based range and the data still needed.

Stated scope for every specification cited

When a figure such as CTC adsorption or hardness is quoted, we identify its series range or batch source. Batch values and available documents are confirmed before the transaction.

Order details confirmed in writing

Packing, moisture protection, particle size and quantity are checked at order confirmation and recorded in the agreed order information, keeping material aligned with vessel filling plans.

Price, availability and lead time by human confirmation

Quotations, quantities and delivery dates are verified by staff and confirmed in a written quotation or order. Capacity figures describe annual output, not stock or fixed schedules.

Follow-up on use and documentation after delivery

Through the agreed contact channel we follow up questions on putting carbon into service, reading batch data or completing documents. This is support, not a performance warranty.

CREDENTIALS

Explore credentials details to support your evaluation.

ISO 9001:2015 certificate for activated carbon sales

ISO 9001:2015

Registrati0n No: 06524Q01338R0S

Beide RoHS test report for an activated carbon sample

Certificate of Analysis

B-R2409C3836

CTI RoHS test report for an activated carbon sample

Certificate of Analysis

Report No. A2260506150101001

UG safety data sheet for activated carbon

Certificate of Analysis

No. 1621112086

CCIC activated carbon sample test report cover

Certificate of Analysis

NO.250100320443888

Shanghai institute wood powder activated carbon report cover

Certificate of Analysis

NO. 1524070087

PACKAGING

Explore packaging details to support your evaluation.

Granular carbon for solvent recovery is packed to limit moisture pickup and dust during transport, with the format agreed at order confirmation.

25 kg bag with PE inner liner

A standard export bag with a polyethylene inner liner, palletised for container loading. The liner limits contact with humid air in transit and keeps handling manageable where bags are carried to the adsorber floor by hand.

25 kg per bag, palletised

500 kg and 1000 kg bulk bags

Bulk bags suit larger vessels and fixed beds, reducing the number of individual bag openings during filling. Fewer openings also mean less spillage and less dust released at the loading point.

500 kg or 1000 kg bulk bag

Damp-route protection on request

For humid shipping routes, desiccant or vacuum packing can be discussed when the order is confirmed. The choice depends on transit time and storage conditions at the receiving site, since moist carbon affects the effective mass supplied.

Desiccant or vacuum packing on request

Heat-treated pallets for export

ISPM-15 heat-treated pallets can be supplied with a fumigation certificate for export markets. Pallet configuration is agreed with the order so that container loading and unloading at the plant follow the same plan.

ISPM-15 heat-treated pallet

Custom packing discussed at order stage

Other bag sizes, labelling and private-label printing can be reviewed against the order quantity and destination. Final packing details, including moisture-barrier requirements, are recorded in the confirmed order information.

Custom options confirmed per order

PROCESS

Explore process details to support your evaluation.

A straightforward path from application details to a confirmed quotation, so the coal-based granular grade suits your solvent recovery duty.

Share your solvent recovery duty

Tell us which solvent or vapour stream you handle, its concentration range, temperature, humidity and airflow. These details show whether a gas-phase granular grade fits the duty.

Match the grade to your vessel

We compare the selected coal-based granular grade and the CTC adsorption and density values with your adsorption box, bed depth and allowed pressure drop.

Agree on the batch specification

The iodine value, methylene blue adsorption and CTC adsorption ranges are references. Batch values and the exact mesh cut are confirmed before quotation.

Confirm packing and quantity

Order confirmation covers packaging, moisture protection, quantity and delivery details, based on the written quotation both sides confirm.

Follow up after delivery

Through the agreed contact channel we follow up on use, documents or handling questions, without a fixed lead time, warranty or sample promise.

DIMENSIONS

Explore dimensions details to support your evaluation.

Granular coal-based carbon suits fixed-bed solvent recovery: cut, hardness and bulk density affect pressure drop and cycle life, while CTC adsorption indicates vapour-duty suitability.

Product form

Granular activated carbon for gas-phase duty

Granular activated carbon sized for fixed beds and continuous gas or flue-gas streams, where pressure drop, hardness and dust behaviour matter alongside adsorption capacity.

Application

Air and gas purification

Odour control, solvent recovery and flue gas treatment, where the carbon has to hold up in the gas phase rather than in a water column.

Product form

Granular activated carbon

Granular media for fixed-bed adsorption and filtration. Compare particle size, pressure drop and handling needs.

FAQ

Explore faq details to support your evaluation.

Which information do you need to recommend a solvent recovery carbon?

Please share the solvent or solvent mixture, its concentration range and the gas flow. Tell us the temperature, relative humidity, dust or oil mist pre-treatment, vessel type, allowed pressure drop and whether you plan steam desorption. That lets us confirm whether a coal-based granular grade fits and which mesh cut suits your bed.

How do CTC adsorption and BET area relate to solvent recovery duty?

CTC adsorption is measured under a defined test method; it is a comparison value for gas-phase and solvent vapour adsorption, not a guarantee for a specific solvent. BET area describes the pore surface accessible to nitrogen. Both help shortlist grades, but the working capacity still depends on the target solvent, its concentration, contact time and regeneration conditions. Confirm the grade against your actual vapour stream.

Which particle size should we choose for a fixed bed?

The frozen specification plan covers particle sizes from 4 to 40 mesh, with the exact cut fixed per order. Smaller particles can improve mass transfer but raise pressure drop, and larger ones reduce pressure drop while extending the mass transfer zone. Match the cut to vessel diameter, bed depth, blower capacity and the dust control available on site.

What does the specification range mean before we order?

The listed iodine value, CTC adsorption, BET area, bulk density or pH values are reference ranges for the series; batch values are confirmed before quotation. Ask for the batch sample data matching the grade you consider and compare methods, units and moisture basis. Specifications from another grade or application should not be transferred to this product.

How is the carbon handled when steam desorption is planned?

Steam desorption and drying introduce heat, moisture and mechanical movement, so hardness and moisture matter alongside adsorption capacity. Discuss the desorption temperature, cycle length, cooling step and condensate handling with your process engineer. How far capacity recovers depends on the solvent, the loaded carbon and the regeneration conditions; confirm it on a representative sample rather than assuming unlimited reuse.

What should we send so the quotation can be prepared?

Please state the target solvent and process, required mesh cut, quantity, packaging, delivery location and any documents you need. Pricing, available quantity and delivery time are confirmed by our team in writing. Technical review of the application comes first, then the batch specification and commercial terms are agreed.