Long-life coal-based granular carbon

Coal-Based Granular Activated Carbon for Long Service Life in Water and Gas Treatment

Coal-based granular activated carbon for water and gas treatment, selected for beds that keep working through repeated backwashing, cycling or regeneration. Hardness of 90% or higher supports mechanical strength, while an iodine value range of 500–1100 mg/g gives a starting point for comparing working capacity. Granular form suits fixed beds, filter vessels and adsorption columns, with 4 to 40 mesh matched to your pressure drop and contact time. Values are confirmed per batch before quotation.

Hardness of 90% or higher supports mechanical strength; confirm batch values before ordering.

Iodine value
500 – 1100 mg/g
Hardness
≥ 90 %
Methylene blue adsorption
≥ 90 mg/g
Request a quote

DESCRIPTION

Explore description details to support your evaluation.

This coal-based granular activated carbon is made for water and gas treatment duties where the media must stay in service through repeated backwashing, cycling or regeneration. Supplied as granules, it packs into fixed beds, filter vessels and adsorption columns, combining a coal-derived porous structure with the mechanical strength needed to resist breakdown in routine operation.

How the material performs in service

Coal-based carbon develops a pore structure suited to a broad range of organic compounds, making it practical for drinking water polishing, industrial wastewater organics reduction, solvent recovery and general gas-phase adsorption. Because it is granulated rather than powdered, water or gas passes through a defined bed with controlled contact time, and the bed can be backwashed and returned to service without replacement after every cycle.

Service life depends less on one headline number than on how the bed holds together. Hardness, abrasion behaviour, particle size distribution, ash content and the target compounds all shape how long a charge remains effective. A carbon that crumbles under backwashing loses capacity through fines and pressure-drop problems long before its adsorption capacity is exhausted.

Selection considerations

Before selecting a grade, define the stream, the compounds to remove, the target outlet quality and the contact time your vessel can provide. Confirm whether the bed will be backwashed, how regeneration is planned, and the pressure drop the system tolerates. To recommend a suitable grade, share your application, flow or throughput, target limits, preferred particle size and required quantity.

SPECIFICATIONS

Explore specifications details to support your evaluation.

Values below are reference figures from the series range. Batch values are confirmed before quotation, so verify iodine value, hardness and mesh size against your application.

Iodine value500 – 1100 mg/g
Hardness≥ 90 %
Methylene blue adsorption≥ 90 mg/g
BET surface area650 – 1000 m²/g
CTC adsorption35 – 95 %
Ash content8 – 20 %
Moisture≤ 8 %
Bulk density0.5 – 0.65 g/cm³
pH value7 – 11
Particle size4 – 40 目

ADVANTAGES

Explore advantages details to support your evaluation.

Coal-based granular carbon is chosen here for mechanical strength and stable operation in repeated service cycles, not for a single headline number.

OUR COMMITMENTS

Six Reasons Industrial Buyers Trust Sanniu Carbon

Our service support follows a clear inquiry-to-delivery process, so carbon selection, documentation and order details are reviewed with you before anything is confirmed.

Application and Product Form Review

We start by reviewing your treatment target, operating conditions and preferred carbon form, then discuss a suitable selection direction before specifications or documents are cited.

Specifications and Document Scope Confirmed

We explain the scope of the quoted specifications and supporting documents; batch values and available files are confirmed before the transaction rather than assumed from a series range.

Packaging and Moisture Protection Checked

Order confirmation covers packaging format and moisture-protection requirements, with the final arrangement based on the order information both parties confirm in writing.

Price, Quantity and Delivery Verified by Staff

Reference pricing, available quantity and delivery timing are checked manually and confirmed through a written quotation or order; annual capacity is not treated as stock or lead time.

Post-Delivery Follow-Up

Through the agreed contact channel, we receive and follow up on questions about product use or requested documents after delivery.

CREDENTIALS

Explore credentials details to support your evaluation.

ISO 9001:2015 certificate for activated carbon sales

ISO 9001:2015

Registrati0n No: 06524Q01338R0S

Beide RoHS test report for an activated carbon sample

Certificate of Analysis

B-R2409C3836

CTI RoHS test report for an activated carbon sample

Certificate of Analysis

Report No. A2260506150101001

UG safety data sheet for activated carbon

Certificate of Analysis

No. 1621112086

CCIC activated carbon sample test report cover

Certificate of Analysis

NO.250100320443888

Shanghai institute wood powder activated carbon report cover

Certificate of Analysis

NO. 1524070087

PACKAGING

Explore packaging details to support your evaluation.

Granular carbon is packed to limit moisture pickup and breakage in handling, with options matched to shipment route and receiving equipment.

Moisture-barrier inner liner

Each outer bag carries a PE inner liner that shields the carbon from humid air during storage and transit, helping protect the as-supplied moisture value until the bag is opened for filling.

25 kg per bag with PE liner

Bulk bags for larger beds

For full filter or adsorber fills, bulk bags reduce the number of individual bags handled at site and lower dust released during charging, provided the lifting and discharge arrangement suits the vessel.

500 kg or 1000 kg bulk bag

Pallets treated for export

Wooden pallets are heat-treated to ISPM-15 requirements and can be supplied with the associated documentation, so consignments are ready for inspection at the destination port.

ISPM-15 heat-treated pallet

Options for humid routes

Where sea freight or long storage is expected, desiccant packs or vacuum packing can be discussed at order stage; the choice depends on route, transit time and warehouse conditions.

Desiccant or vacuum option

Labels and packing records

Bags can carry grade, batch and size markings agreed with the buyer, making it easier to match received material to the packing list and to keep identification clear in the warehouse.

Buyer-agreed bag labelling

PROCESS

Explore process details to support your evaluation.

Inquiry to delivery follows a clear, documented sequence, so technical fit and order details are confirmed before shipment.

Industrial water treatment equipment supported by activated carbon filtration.

Share the operating conditions

Tell us the target compounds, water or gas stream, flow or batch size, pH or humidity, temperature and the specification you need to meet, so the application can be assessed.

Granular  coal based Activated Carbon

Align on grade and size

We compare coal-based granular options against your bed, filter or adsorber, then confirm the preferred particle size, key values and any purity-sensitive limits in writing.

Laboratory workspace for evaluating activated carbon samples before purchase.

Confirm specifications and documents

The batch specification and the documents available for it are reviewed before quotation, including test method notes, so both sides work from the same reference values.

Stacked bulk bags ready for dispatch

Check packing and shipment terms

Bag type, moisture protection and pallet requirements are agreed together with quantity and destination, and the loading arrangement is fixed in the order confirmation.

Activated carbon in sample jars

Review the delivered batch

On arrival, compare the received material and its records with the agreed specification, keep a retained sample, and raise any deviation with the operating data.

DIMENSIONS

Explore dimensions details to support your evaluation.

Coal-based granular activated carbon is offered across several particle size ranges. Matching the mesh fraction to your vessel, flow rate and pressure drop helps support a long working life.

Product form

Coal-based granular activated carbon

Granular activated carbon produced from coal, screened to a defined particle size range for fixed beds and continuous water treatment columns.

Product form

Granular activated carbon

Granular media for fixed-bed adsorption and filtration. Compare particle size, pressure drop and handling needs.

FAQ

Explore faq details to support your evaluation.

What makes this coal-based granular carbon suited to a long service life?

Service life is decided by the working conditions, not by the raw material name alone. This grade pairs a coal-based precursor with a granular form intended for packed beds and filters. The reference range covers a hardness of 90% or above and an iodine value of 500-1100 mg/g, giving a starting point for comparing mechanical durability with adsorption capacity. Actual batch values are confirmed before quotation, so confirm the specification plan against your own duty cycle rather than assuming every lot behaves identically.

How do hardness, abrasion and fines affect the working life of a carbon bed?

Granular carbon in a fixed bed is exposed to backwashing, flow and repeated handling. A higher hardness figure suggests better resistance under the stated test method, but it does not by itself guarantee a specific carbon loss in your vessel. Particle size also matters: the reference range spans 4-40 mesh, and the right cut depends on your pressure drop, contact time and fines retention. Compare reports on the same sample form and method; these values are range guidance, not a batch certificate.

Which indications help judge remaining useful life before replacement?

Track the performance parameter that matters in your process, whether that is a treated-water target, an odour threshold or a solvent-recovery result. Record it against throughput, contact time and inlet conditions so a trend is visible rather than a single reading. A rise in pressure drop, more fines in the backwash or a falling working capacity can all signal that the bed needs attention, but each has a different cause. Decide on replacement or regeneration from your own records and agreed acceptance criteria, not from a general rule.

Does this grade suit both water and gas treatment duties?

A granular coal-based carbon can be evaluated for several duties, but water and gas service demand different data. For liquid duty, describe the medium, pH, temperature, flow or batch volume and the target. For gas duty, describe the component, concentration, humidity, air flow and allowable pressure drop. The reference CTC adsorption range of 35-95% and BET surface area of 650-1000 m²/g show the comparison basis, not a guarantee for every compound; selection follows your agreed specification.

What should an inquiry include to get an accurate quotation?

State the medium, the contaminant or target, and whether you plan a packed bed or batch addition. Include flow rate or batch volume, contact time, temperature and pH where relevant, plus the particle size or mesh you need, the expected quantity and delivery location. Mention required documents and your batch acceptance method. With that we can discuss the grade, the agreed specification plan and next steps. Price, available quantity and delivery are confirmed by written quotation, not assumed from a catalogue page.