Granular activated carbon for air purification
Granular Activated Carbon for Air Purification: Selecting Iodine Value, Hardness and Mesh for Gas-Phase Service
Granular activated carbon for air purification is a coal-based gas-phase adsorbent for packed beds, adsorption boxes and filter vessels. It targets organic vapours, odours and solvent residues in exhaust streams where gas composition, humidity and flow are known. A defined bed depth makes contact time, pressure drop and replacement intervals plannable. CTC adsorption, iodine value and surface area help screen grades, but none predicts service life alone. Share the gas stream, airflow and allowable pressure drop to confirm batch values.
Share gas composition, flow and target limits; we confirm mesh, hardness and batch values before quotation.
- Iodine value
- 500 – 1100 mg/g
- Methylene blue adsorption
- ≥ 90 mg/g
- Hardness
- ≥ 90 %
DESCRIPTION
Explore description details to support your evaluation.
Granular activated carbon for air purification is a coal-based, gas-phase adsorbent supplied as graded granules for packed beds, adsorption boxes and filter vessels. It removes organic vapours, odours and solvent residues from air streams and polishes exhaust where gas components, humidity and flow are known. A fixed bed of defined depth makes contact time, pressure drop and replacement intervals plannable.
Gas-phase performance depends on more than one headline number. CTC adsorption is a method-specific comparison value for small-molecule vapour uptake and helps screen grades, but it cannot replace dynamic working capacity on the actual gas stream. Iodine value and surface area describe pore development, yet neither predicts service life without target concentration, temperature, humidity and bed geometry.
What to check before selection
Gas components and concentration range, including variability over the operating cycle.
Air flow and allowable pressure drop, which with bulk density and bed depth set fan load and residence time.
Temperature and relative humidity; high moisture can compete with organic vapours for adsorption sites.
Pre-treatment for dust, oil mist or particulate, which can blind the carbon surface and shorten service life.
Hardness and particle size grading matched to the handling and filling conditions of the vessel.
A sample test under representative conditions is a better starting point than ranking by iodine value alone. When comparing regeneration or replacement, include pressure drop, carbon loss from handling and changeover cost, not only price per tonne. Compare quotations on one moisture basis so effective dry-carbon mass is clear.
To receive a suitable recommendation, share the target gas components and concentration, airflow, temperature and humidity, available bed depth or equipment type, required particle size and expected purchase quantity, plus any acceptance limit and method. These details let us confirm which grade fits the application and which values to check on the batch sample.
SPECIFICATIONS
Explore specifications details to support your evaluation.
Compare values on one method and moisture basis. Ranges are series references; the batch certificate is confirmed before quotation, and iodine value alone does not predict performance for a specific gas.
| Iodine value | 500 – 1100 mg/g |
|---|---|
| Methylene blue adsorption | ≥ 90 mg/g |
| BET surface area | 650 – 1000 m²/g |
| CTC adsorption | 35 – 95 % |
| Ash content | 8 – 20 % |
| Moisture | ≤ 8 % |
| Hardness | ≥ 90 % |
| Bulk density | 0.5 – 0.65 g/cm³ |
| pH value | 7 – 11 |
| Particle size | 4 – 40 目 |
ADVANTAGES
Explore advantages details to support your evaluation.
These points help air-treatment buyers compare granular activated carbon on the criteria that matter before a fixed-bed or adsorber order is placed.
Gas-phase grading checked against your target compounds
Share the gas or vapor you need to remove, its concentration, temperature and humidity so the grade, mesh and bed depth can be matched to that duty rather than chosen from one headline number.
Duty-matched selection
OUR COMMITMENTS
Six Reasons Industrial Buyers Trust Sanniu Carbon
Our working process is inquiry-led: applications are reviewed with you before a grade is proposed, and commercial terms are confirmed in writing rather than assumed from a catalogue page.
Use case and target reviewed first
Your inquiry is read for the gas or vapor to be treated, the process step, the condition to improve and any existing material or operating problem, so the discussion starts from the duty rather than a stock answer.
Specification scope stated clearly
The specifications and documents offered are explained with their scope and applicable grade. Batch values and available files are confirmed before a transaction, and nothing is extended to other products.
Packaging and moisture protection confirmed
When an order is confirmed, the packing format, bag size and moisture-protection requirements are checked against your instructions and recorded in the agreed order information.
Price, quantity and delivery verified by people
Pricing, available quantity and lead time are verified manually and follow the written quotation or order confirmed by both sides. Annual capacity is not treated as stock or a fixed delivery date.
After-delivery questions followed up
Usage questions and document requests after delivery are received and followed through the agreed contact channel, so the conversation continues beyond the shipment.
CREDENTIALS
Explore credentials details to support your evaluation.
ISO 9001:2015
Registrati0n No: 06524Q01338R0S
Certificate of Analysis
B-R2409C3836
Certificate of Analysis
Report No. A2260506150101001
Certificate of Analysis
No. 1621112086
Certificate of Analysis
NO.250100320443888
Certificate of Analysis
NO. 1524070087
PACKAGING
Explore packaging details to support your evaluation.
Bags are selected around your receiving equipment, storage conditions and shipping route, with the packing format written into the confirmed order before dispatch.
PE-lined export bag
A standard export bag with a polyethylene inner liner shields the carbon from ambient moisture, dust and handling exposure. The filled bags are palletised for container loading, so the format suits plants that weigh and charge carbon in smaller batches and keep the liner sealed between uses.
25 kg per bag
Bulk bag for large vessels
For a fixed bed or large adsorber charged in one operation, a bulk bag reduces handling steps and openings the carbon passes through. Its capacity suits mechanical lifting, and a double-lined version is available on request for humid climates.
500 kg or 1000 kg per bag
Heat-treated export pallets
Wooden pallets are heat-treated and supplied with the corresponding certificate so shipments meet common import requirements for solid wood packing. Pallets are sized to the container plan agreed with you, and bag counts per pallet are confirmed in the order documents before loading.
ISPM-15 pallet, certificate supplied
Moisture-barrier options for damp routes
Carbon picks up moisture in transit, and a high as-supplied moisture figure reduces the dry mass you paid for. For humid or long sea routes we can discuss desiccant or vacuum-style protection, with the choice recorded in the order so it is not assumed.
Desiccant insert or vacuum packing on request
Custom marking and packing on request
Printed bag artwork and privv-style labelling can be discussed against your requirements, with the wording and layout confirmed in writing before production. Any special marking, batch label or document set is listed in the order so the packing matches what the receiving site expects.
Printed bags or labels, subject to confirmation
PROCESS
Explore process details to support your evaluation.
A typical evaluation sequence for granular activated carbon in gas-phase service, from first inquiry to batch confirmation.
Define the gas stream and treatment target
Record the target compounds, concentration range, temperature, humidity, airflow and any dust or oil mist present, so the carbon is matched to the actual duty rather than the material name alone.
Check pretreatment and equipment limits
Confirm the adsorber type, bed depth, allowable pressure drop and existing replacement or desorption method. Pretreatment needs and fan capacity often constrain which mesh size is workable.
Agree the reference specifications
Shortlist iodine value, hardness, moisture and mesh grading, then state the test methods and units for each. Values such as 500-1100 mg/g iodine are series references, not a batch guarantee.
Confirm the batch and documents
Before quotation, agree which key items are measured on the supplied batch, which reports are provided and how samples are retained, so incoming material can be checked against a common basis.
Review performance after charging
Track pressure drop, breakthrough and replacement interval against the starting data. If results differ, review pretreatment, bed conditions and regeneration practice before attributing the change to the carbon.
DIMENSIONS
Explore dimensions details to support your evaluation.
Granular activated carbon suits fixed-bed and filter-box duty where gas must pass a packed layer, so bed depth, mesh grading and pressure drop should be matched to the fan and housing.
Product form
Granular activated carbon for gas-phase duty
Granular activated carbon sized for fixed beds and continuous gas or flue-gas streams, where pressure drop, hardness and dust behaviour matter alongside adsorption capacity.
Application
Air and gas purification
Odour control, solvent recovery and flue gas treatment, where the carbon has to hold up in the gas phase rather than in a water column.
Product form
Granular activated carbon
Granular media for fixed-bed adsorption and filtration. Compare particle size, pressure drop and handling needs.
FAQ
Explore faq details to support your evaluation.
Which gas data is needed to select a granular activated carbon for air purification?
Share the target compounds and their concentration range, temperature, relative humidity, airflow and velocity, pretreatment for dust or oil mist, equipment type, permitted pressure drop, and the current change-out or regeneration method. Gas-phase performance cannot be judged from iodine value or the raw-material name alone. When field data is not yet available, we first agree on which measurements should be collected so the grade is compared under representative conditions.
Does a higher iodine value always mean better gas-phase performance?
No. Iodine value is a comparative measure of accessible small-molecule adsorption under a specified test; it is not the working capacity for every VOC, hydrogen sulfide or flue-gas component. CTC adsorption is also method-specific. Target gas, pore structure, surface chemistry, competing adsorption, contact time and bed conditions all affect results. For air-purification projects, the grade should be compared with the target gas and operating data, not ranked by one number.
How do mesh size and pressure drop affect an air-purification filter bed?
Finer mesh may improve mass transfer but can raise pressure drop, dust and carbon loss, while coarser grading may reduce resistance but change contact efficiency. Particle size should be confirmed against your receiving equipment, vessel dimensions and airflow. Bulk density, together with bed depth and velocity, is used to estimate pressure drop. Hardness and dust behavior also matter for conveying, refilling and repeated operation, so mechanical data are compared on the same sample form and method.
What specifications are confirmed before an air-purification order is quoted?
The agreed specification plan lists reference ranges, while batch values are confirmed before quotation. Typical checks include iodine value, hardness, moisture, ash, bulk density, pH and mesh grading. Series reference ranges do not replace a batch certificate, and the comparison basis, units and test methods should match. Please state required items, limits and acceptance methods so the quotation and documents refer to one defined product rather than a general description.
Which documents and application limits should buyers confirm?
Our ISO 9001 certificate covers activated carbon sales, not production, and sample RoHS reports apply only to the tested samples. A Safety Data Sheet is available for the activated carbon. Confirm whether a certificate of analysis, specific test items, packaging and moisture protection are required for your order. High temperature, high humidity, flammable components and emission targets should be assessed by qualified technical personnel before the grade is selected.
What should be included in an inquiry for an air-purification carbon?
Describe the gas stream and where the carbon sits in the process, then give flow or airflow, concentration range, temperature, humidity, target limits, available equipment, permitted pressure drop and preferred mesh grading. Also state quantity, delivery location, packaging, moisture basis and any documents or acceptance tests you need. These details let us confirm a suitable grade and specification direction; price, available quantity and lead time are verified by our team rather than assumed from the inquiry.