Coal-based granular activated carbon

Coal-Based Granular Activated Carbon for Environmental Engineering | Selection Guide

Coal-based granular activated carbon suits environmental engineering duties where a durable, flowable adsorbent must hold up in fixed beds, filter vessels and packed contactors. Screened granules let water, wastewater or off-gas pass through a settled bed with manageable pressure drop, supporting colour, odour and dissolved organic removal, effluent polishing and gas-phase adsorption. Selection starts from the target compound or colour, flow or batch volume, and acceptable particle size.

For water, wastewater and gas-phase duties: share your target, flow and particle size so selection can be confirmed.

Iodine value
500 – 1100 mg/g
Methylene blue adsorption
≥ 90 mg/g
Request a quote

DESCRIPTION

Explore description details to support your evaluation.

Coal-based granular activated carbon is a practical choice for environmental engineering duties where a durable, flowable adsorbent must hold up in fixed beds, filter vessels and packed contactors. Made from selected coal and activated to develop an internal pore structure, it is supplied as screened granules so water and gases can pass through a settled bed with manageable pressure drop.

Where it fits in environmental service

Typical duties include removing colour, odour and dissolved organic matter from water and wastewater, polishing effluents ahead of discharge or reuse, and treating industrial off-gas and solvent-laden air in adsorption boxes. In liquid service the granules form a bed through which the stream passes; contact time, bed depth and flow rate determine how much work the carbon can do before replacement or regeneration.

Selection points worth confirming

Start from the target, not a single number: identify the compound or colour to reduce, the incoming and required levels, and the flow or batch volume. Agree the particle size and screening cut that suits your vessel and backwash arrangements, since finer granules can raise pressure drop. Mechanical strength, ash level and moisture also affect fines generation and the effective mass of carbon you receive. Indicators such as iodine value compare grades under stated methods but do not predict performance in a particular stream; a bench or pilot test using your own medium remains the most reliable check.

Information for an inquiry

To discuss a suitable grade, please share your application and process stage, target substances and concentrations, pH or temperature, flow rate or batch size, vessel type and permitted pressure drop, and required particle size range, along with expected quantity and packaging preference. These details let us confirm the appropriate specification and batch values before a quotation is issued.

SPECIFICATIONS

Explore specifications details to support your evaluation.

The ranges below outline this coal-based granular series. Values are reference points for comparison; the agreed grade and batch certificate confirm what is supplied.

Iodine value500 – 1100 mg/g
Methylene blue adsorption≥ 90 mg/g
BET surface area650 – 1000 m²/g
CTC adsorption35 – 95 %
Ash content8 – 20 %
Moisture≤ 8 %
Hardness≥ 90 %
Bulk density0.5 – 0.65 g/cm³
pH value7 – 11
Particle size4 – 40 目

ADVANTAGES

Explore advantages details to support your evaluation.

What a buyer can check before placing an order.

OUR COMMITMENTS

Six Reasons Industrial Buyers Trust Sanniu Carbon

Our confirmed service process starts with your application: we review the use case, treatment target and carbon form, then discuss a selection direction before any quotation.

Application Review Before Selection

We begin with what you are treating, the process stage and the target indicator, so the carbon form and grade are discussed against your actual working conditions rather than a generic listing.

Specification Scope Explained

We state the applicable scope of the specifications and documents referenced for the product in question, and confirm batch values and available files before the transaction.

Order Details Confirmed in Writing

Packaging, moisture-protection requirements and order specifics are checked when the order is confirmed, according to the information both sides agree on.

Price, Quantity and Lead Time by Manual Review

Prices, available quantities and delivery times are verified by our team and take effect only through a written quotation or order confirmed by both parties.

Post-Delivery Follow-Up

Through the agreed contact channel, we receive and follow up on questions about product use or documentation after delivery.

CREDENTIALS

Explore credentials details to support your evaluation.

ISO 9001:2015 certificate for activated carbon sales

ISO 9001:2015

Registrati0n No: 06524Q01338R0S

Beide RoHS test report for an activated carbon sample

Certificate of Analysis

B-R2409C3836

CTI RoHS test report for an activated carbon sample

Certificate of Analysis

Report No. A2260506150101001

UG safety data sheet for activated carbon

Certificate of Analysis

No. 1621112086

CCIC activated carbon sample test report cover

Certificate of Analysis

NO.250100320443888

Shanghai institute wood powder activated carbon report cover

Certificate of Analysis

NO. 1524070087

PACKAGING

Explore packaging details to support your evaluation.

Activated carbon bags stacked for export
25 kg PE-lined bag

PROCESS

Explore process details to support your evaluation.

A short outline of how coal-based granular activated carbon is prepared and checked before it reaches your plant.

Raw coal selection and preparation

Selected coal is crushed and sized to suit the intended granular product, giving a consistent feed for carbonisation rather than a mixed, variable input.

Carbonisation and activation

The material is carbonised and then activated to develop the porous structure. Activation conditions are controlled to keep the pore development aligned with the series range.

Screening to the agreed mesh cut

Activated material is screened to the particle size range agreed for the order, reducing fines and giving a more uniform bed for fixed-bed and filter duties.

Batch sampling and testing

Samples are taken per batch and checked for the agreed parameters, such as iodine value, moisture, hardness and pH, using stated methods so figures can be compared.

Packing and dispatch

Confirmed batches are packed in the agreed bag format, palletised where required, and prepared for shipment with the documents agreed at order confirmation.

DIMENSIONS

Explore dimensions details to support your evaluation.

Coal-based granular activated carbon suits fixed-bed water and off-gas treatment where pressure drop, bed contact time and handling strength matter. Confirm the cut and batch data before selection.

Product form

Coal-based granular activated carbon

Granular activated carbon produced from coal, screened to a defined particle size range for fixed beds and continuous water treatment columns.

Application

Water treatment

Activated carbon selection for water polishing, colour and odour control. Share the water analysis and treatment targets.

Material

Coal-based activated carbon

A versatile material family for industrial treatment, with granular, pellet and powder forms selected to suit the process.

FAQ

Explore faq details to support your evaluation.

What should I confirm before choosing coal-based granular activated carbon?

Start with the medium, the target impurity or colour, flow or batch volume, pH, temperature and how the carbon will be contacted. For fixed beds, also note bed depth, contact time, backwash and the permitted pressure drop. These conditions decide whether a granular coal grade fits the duty at all; the raw-material name alone does not.

How do iodine value, methylene blue and CTC results differ?

Iodine value reflects adsorption of a small probe under the stated test, and methylene blue gives information on access to somewhat larger molecules. CTC adsorption is a comparative gas-phase test under a stated method, not a dynamic working capacity. Compare results only when method, unit and sample form match, and verify performance with your own medium rather than one headline number.

Why can hardness and particle size matter as much as adsorption?

In service, the bed must keep its shape and flow. Low hardness or a wide size cut can raise fines, pressure drop and carbon loss during handling, backwash or regeneration. Agree the screening cut for your vessel, then check hardness on the same batch sample so mechanical behaviour and adsorption data describe one material.

What do the stated specification ranges mean, and are they a guarantee?

The ranges are reference values from the coal-based granular series, not a fixed certificate for every batch. The highlighted iodine and methylene blue values, plus moisture, pH, ash and bulk density, are confirmed on the actual batch before quotation. Ask for the agreed specification plan and the corresponding batch data, and keep the sample and report traceable.

Which inputs should I include in an inquiry?

  • Treatment objective and current problem, with the medium or gas composition

  • Flow rate, batch size or concentration, plus pH and temperature where relevant

  • Target value to reach and how it will be tested

  • Preferred particle size, vessel type and contact or regeneration conditions

  • Required quantity, packaging, delivery location and documents needed

Price, available quantity and lead time are confirmed by our staff against the agreed grade and specification, not from this page.