Coal-based GAC for flue gas duty
Coal-Based Granular Activated Carbon for Waste Incineration Plant Flue Gas Treatment
Coal-based granular activated carbon suits waste incineration plant flue gas treatment, where acidic gases, trace organics and mercury-bearing vapours must be captured before release. Its hard, dense granules fit fixed-bed and moving-bed adsorbers, while the developed pore structure supports gas-phase adsorption and polishing downstream of lime and baghouse stages. Selection balances CTC and iodine adsorption, surface area, ash and mechanical strength against your gas conditions; batch values are confirmed on the certificate of analysis before quotation.
Share your flue gas conditions and target figures so we can confirm the right grade and batch values.
- Iodine value
- 900 – 1050 mg/g
- Methylene blue adsorption
- ≥ 135 mg/g
DESCRIPTION
Explore description details to support your evaluation.
Coal-based granular activated carbon is a workhorse adsorbent for flue gas treatment in waste incineration plants, where combustion generates acidic gases, trace organics and mercury-bearing vapours that must be captured before release. The granular form suits fixed-bed and moving-bed arrangements and is commonly evaluated for dioxin and heavy-metal control, odour abatement and polishing duty downstream of lime and baghouse stages.
The coal precursor yields a hard, dense granule with a well-developed pore structure. Micropores drive gas-phase adsorption, while mesopores and macropores help transport molecules to the inner surface. For incineration flue gas, selection usually balances four properties: adequate CTC and iodine adsorption for volatile organics, sufficient surface area, low ash to limit inert burden, and good hardness so the bed resists attrition.
Selection considerations for incineration duty
Gas temperature, moisture and acid dew point at the injection or bed location
Target pollutants: dioxins, furans, mercury, VOCs or odour
Granule size and bed depth against pressure drop and contact time
Spent-carbon handling, regeneration or replacement policy
Actual performance depends on contact time, concentration and competing species in the gas, so the figures in the specification table are reference ranges confirmed per batch on the certificate of analysis. Share your flue gas conditions, target removal levels, preferred mesh cut and expected consumption in your inquiry, and our team will confirm the suitable grade and available documentation.
SPECIFICATIONS
Explore specifications details to support your evaluation.
Indicative figures for this coal-based granular grade are shown below. Values are series references; the batch certificate of analysis is confirmed before quotation.
| Iodine value | 900 – 1050 mg/g |
|---|---|
| Methylene blue adsorption | ≥ 135 mg/g |
| BET surface area | 850 – 1000 m²/g |
| CTC adsorption | 50 – 80 % |
| Ash content | 10 – 16 % |
| Moisture | ≤ 5 % |
| Hardness | ≥ 92 % |
| pH value | 7 – 10 |
| Particle size | 4 – 8 目 |
ADVANTAGES
Explore advantages details to support your evaluation.
Selection points a procurement or technical team can verify before committing to a coal-based granular grade for flue gas duty.
Coal-based granular form for fixed adsorber beds
A hard granular coal-based carbon suits packed beds where gas passes through the layer, with low dust and stable pressure drop during operation.
Fixed-bed form
OUR COMMITMENTS
Six Reasons Industrial Buyers Trust Sanniu Carbon
These are the working steps we follow with buyers, not fixed commercial terms. Specific price, quantity, lead time and batch values are confirmed in writing.
Application Review Before Selection
We first review your flue-gas duty, treatment target and preferred carbon form, then discuss suitable coal-based granular directions with you.
Scope of Specifications Stated Clearly
We explain where the quoted specification values and the documents we can provide apply; batch indicators and available paperwork are confirmed before any transaction.
Packing and Moisture Protection Agreed
Order confirmation covers packing format and moisture-protection needs, so the delivered material matches what both sides put in writing.
Price, Quantity and Lead Time Verified
These commercial terms are checked by our team and confirmed in a written quotation or order, not assumed from a catalogue page.
Follow-Up After Delivery
Through the agreed contact channel, we receive and respond to questions about use or documentation once the material has been delivered.
CREDENTIALS
Explore credentials details to support your evaluation.
ISO 9001:2015
Registrati0n No: 06524Q01338R0S
Certificate of Analysis
B-R2409C3836
Certificate of Analysis
Report No. A2260506150101001
Certificate of Analysis
No. 1621112086
Certificate of Analysis
NO.250100320443888
Certificate of Analysis
NO. 1524070087
PACKAGING
Explore packaging details to support your evaluation.
Packing choices for coal-based granular activated carbon, agreed against the confirmed order before shipment.
PROCESS
Explore process details to support your evaluation.
Order steps from first inquiry to after-delivery support, with specifications and documents confirmed in writing before shipment.
Inquiry review and application check
We review the flue gas duty, target pollutants, gas flow and required mesh cut so the quoted grade matches your incineration plant conditions.
Grade selection and specification scope
We state which specification values and supporting documents apply to the proposed coal-based granular grade, without extending results to other products.
Batch values confirmed before order
Iodine value, CTC adsorption, BET surface area, ash, moisture and hardness are confirmed for the batch, with the test method stated on request.
Packing and moisture protection agreed
Bag type, liner, pallet and any desiccant or vacuum options are checked against the order, with damp-route handling decided at confirmation.
Price, quantity and lead time confirmed
Commercial terms are verified by our team and take effect only in the written quotation or order agreed by both parties.
Delivery follow-up on use and documents
After shipment, our agreed contact channel handles questions on handling, loading or documents so the plant can complete its own acceptance checks.
DIMENSIONS
Explore dimensions details to support your evaluation.
For waste incineration flue gas duty, 4x8 mesh coal-based granular carbon suits fixed-bed and packed-tower arrangements where gas passes through a defined bed depth.
Product form
Granular activated carbon
Granular media for fixed-bed adsorption and filtration. Compare particle size, pressure drop and handling needs.
Product form
Coal-based granular activated carbon
Granular activated carbon produced from coal, screened to a defined particle size range for fixed beds and continuous water treatment columns.
Application
Air and gas purification
Odour control, solvent recovery and flue gas treatment, where the carbon has to hold up in the gas phase rather than in a water column.
FAQ
Explore faq details to support your evaluation.
Which grade of coal-based granular activated carbon is suitable for waste incineration flue gas?
For flue gas treatment, select a coal-based granular grade on the basis of your gas flow, contaminant type and concentration, target removal level, and available pressure drop. Choose particle size to balance adsorption contact with acceptable airflow resistance; mixed beds or combined acid-gas and dioxin/mercury control may require a different grade. The series specifications are reference ranges only. Batch values are confirmed on the certificate of analysis before quotation and order.
Do the iodine, CTC and methylene blue values state performance in flue gas duty?
No. Iodine value, CTC adsorption and methylene blue adsorption are laboratory indications of adsorption capacity and pore development, not a guarantee of stack emission performance. Actual performance in a gas treatment line depends on gas composition, temperature, humidity, residence time, bed depth, carbon loading and the presence of inhibitors such as sulfur or moisture. Treat these figures as selection indicators and validate the grade under your own operating conditions.
What information should I include in an inquiry for flue gas carbon?
To help us confirm a suitable grade, please describe the waste type and flue gas source, gas flow rate, temperature and moisture level, the contaminants to be removed and their inlet concentrations, and any target outlet limits. Also state the required particle size, preferred bed or filter arrangement, bulk quantity and delivery location. If available, include relevant operating data or a previous certificate. We will then propose a grade and specification plan, and confirm batch values before pricing.
How are particle size and mechanical strength relevant in fixed beds?
In a fixed or moving bed, particle size affects airflow resistance and the balance between adsorption and pressure drop. A 4x8 mesh cut is a common starting point for gas-phase applications, but other cuts can be quoted on request. Mechanical strength helps the carbon withstand handling and repeated backwashing or replacement without excessive breakdown. Because these properties influence both system design and carbon consumption, confirm the specific cut and batch hardness with your engineering team before ordering.
What packaging, moisture control and documents apply to a flue gas carbon order?
Packaging and moisture protection are confirmed at order stage, taking into account transport and storage conditions. Typical specifications state a moisture limit at packing and an ash content range, but the final figures must match the agreed batch. Our ISO 9001:2015 certificate covers activated carbon sales, not production. Sample-specific RoHS reports and an SDS are available for reference; these do not certify the whole series. Batch COA and applicable documents are confirmed before shipment.
Can you guarantee a fixed price, quantity or delivery date for this project?
Prices, available quantities and lead times depend on raw material supply, order volume and scheduling, so they are confirmed by our team in a written quotation or order. We do not publish fixed stock levels, minimum order quantities or delivery commitments. After an inquiry, we review the application and specification, then confirm price, quantity and timing in writing before you commit. Delivery follow-up and document questions are handled through the agreed contact channel.