Coal-based grades for gas-phase flue gas duty
Activated Carbon for Flue Gas Treatment: Selecting Coal-Based Grades for SO₂, NOx and Dioxin Control
Coal-based granular activated carbon suits continuous flue gas duty in power plants, waste incinerators and industrial boilers, where large gas volumes carry sulfur dioxide, nitrogen oxides, dioxins and heavy metals. The granular form packs into fixed-bed or moving-bed adsorbers, and its hardness helps it resist breakdown during handling and regeneration. Screening weighs iodine value, CTC adsorption, surface area and particle size against your pollutant target, temperature, moisture and vessel design. Figures are series reference ranges; batch values are confirmed before quotation.
Compare iodine value, CTC adsorption and particle size with your flue gas conditions; batch values are confirmed before quotation.
- Iodine value
- 500 – 1100 mg/g
- Methylene blue adsorption
- ≥ 90 mg/g
- Particle size
- 4 – 40 目
DESCRIPTION
Explore description details to support your evaluation.
For flue gas treatment, high surface area alone is not enough. Coal-based granular activated carbon gives flue gas systems a durable, abrasion-resistant adsorbent with a pore structure suited to capturing sulfur dioxide, nitrogen oxides, dioxins, heavy metals and residual organic vapors. It suits power plants, waste incinerators, cement kilns and industrial boilers where gas volumes are large and operation is continuous.
The granular form lets the carbon be packed into fixed-bed or moving-bed adsorbers and handles the pressure drop and dust load typical of flue gas streams. Coal as the raw material supports a developed micropore and mesopore network, helping the carbon take up both small gas molecules and larger organic compounds. Hardness and low moisture help it resist breakdown during handling and regeneration.
Points to Confirm Before Inquiry
Flue gas composition and target pollutant, since SO₂, NOx, dioxins and mercury call for different pore and impregnation choices.
Gas temperature, flow rate and moisture level, which affect adsorption efficiency and bed design.
Particle size range and bed type, so the granular carbon suits the pressure drop and handling system.
Whether the carbon is used once or regenerated, and the expected service life between changes.
Ask for coal-based granular activated carbon for flue gas treatment and share your gas conditions and target emission limits. Send the application details, required particle size and expected quantity, and our team will confirm the suitable grade and batch specifications before quotation.
SPECIFICATIONS
Explore specifications details to support your evaluation.
Reference ranges for coal-based flue gas grades. Actual batch values are confirmed before quotation. Consider iodine value, CTC adsorption and particle size against your duty.
| Iodine value | 500 – 1100 mg/g |
|---|---|
| Methylene blue adsorption | ≥ 90 mg/g |
| BET surface area | 650 – 1000 m²/g |
| CTC adsorption | 35 – 95 % |
| Ash content | 8 – 20 % |
| Moisture | ≤ 8 % |
| Hardness | ≥ 90 % |
| Bulk density | 0.5 – 0.65 g/cm³ |
| pH value | 7 – 11 |
| Particle size | 4 – 40 目 |
ADVANTAGES
Explore advantages details to support your evaluation.
For flue gas treatment, the useful comparison is between pore structure, stated batch figures and the duty the carbon will face — not marketing claims.
Coal-based grades for SO₂, NOx and dioxin duties
Coal-based activated carbon gives a dense, well-developed pore structure that suits fixed-bed gas-phase duty, where the carbon must hold up over long contact periods.
Gas-phase suitability
OUR COMMITMENTS
Six Reasons Industrial Buyers Trust Sanniu Carbon
These steps describe how an inquiry is handled. They are not a fixed price, stock, lead-time or performance guarantee; each item is confirmed in writing.
We review the duty before recommending a grade
On receiving an inquiry, we check the gas stream, treatment target and required product form, then discuss the selection direction with you before quoting.
We state what each figure and document covers
We explain the scope of the cited specifications and reports. Batch values and the files that can be supplied are confirmed before the transaction.
We confirm packing and moisture protection at order
When the order is confirmed, packing specification and moisture-protection requirements are checked and recorded in the order information agreed by both sides.
We confirm price, quantity and lead time in writing
Price, available quantity and lead time are verified by our staff and are valid only in the written quotation or order confirmed by both sides.
We follow up after delivery
Through the agreed contact channel, we receive and follow up questions about product use or documentation after delivery.
CREDENTIALS
Explore credentials details to support your evaluation.
ISO 9001:2015
Registrati0n No: 06524Q01338R0S
Certificate of Analysis
B-R2409C3836
Certificate of Analysis
Report No. A2260506150101001
Certificate of Analysis
No. 1621112086
Certificate of Analysis
NO.250100320443888
Certificate of Analysis
NO. 1524070087
PACKAGING
Explore packaging details to support your evaluation.
Packing is agreed at order confirmation, including the moisture protection needed for the shipping route.
PE-lined bags for bagged shipments
Activated carbon is packed in bags with a PE inner liner to limit moisture pickup in transit; bag mass and palletisation are set in the confirmed order.
Bag size and pallet layout agreed per order
Bulk bags for larger fixed beds
Bulk bags suit larger vessels and fixed beds, reducing handling and dust during filling; the bag mass and discharge arrangement are confirmed with the order.
Bulk bag mass confirmed at order
Moisture protection matched to the route
Because activated carbon adsorbs moisture, the barrier and closure are chosen for the shipping route and stated in the order; no fixed desiccant or vacuum option is assumed.
Barrier and closure per confirmed order
Pallet and marking details agreed in writing
Pallet type, labelling and shipping marks are agreed before dispatch and recorded in the order information so the goods arrive identified as specified.
Pallet and marks per order confirmation
Packing checked against the order before dispatch
Before dispatch, the packing specification is checked against the confirmed order information, including the moisture-protection requirements agreed with the buyer.
Checked before dispatch
PROCESS
Explore process details to support your evaluation.
A clear, documented route from first inquiry to delivered order helps you confirm grade, packaging and batch documents before commitment.
Share your flue gas duty and target figures
Tell us the treated gas, flow or concentration, target SO₂, NOx or dioxin limits, particle size and quantity so the grade can be screened against a real duty.
Align the selection direction
We review your duty description and propose a suitable carbon type and form, discussing iodine value, CTC adsorption, surface area and mesh range as screening criteria.
Confirm specification and document scope
We state the applicable specification and the scope of any referenced report for the grade under discussion; specific batch figures and available documents are confirmed before trade.
Check packaging and moisture protection
At order confirmation, packaging format and moisture-protection needs are reviewed with you, and the agreed order information governs delivery.
Verify price, quantity and lead time
Price, available quantity and lead time are checked by our team and confirmed in a written quotation or order; the website itself does not commit to them.
Follow up after delivery
Through the agreed contact channel we receive and follow up questions about use or documents after delivery, without implying a fixed warranty or performance guarantee.
DIMENSIONS
Explore dimensions details to support your evaluation.
Review the dimensions that shape grade selection for flue gas duty, including iodine value, methylene blue adsorption and particle size, with batch values confirmed before quotation.
Product form
Granular activated carbon for gas-phase duty
Granular activated carbon sized for fixed beds and continuous gas or flue-gas streams, where pressure drop, hardness and dust behaviour matter alongside adsorption capacity.
Application
Air and gas purification
Odour control, solvent recovery and flue gas treatment, where the carbon has to hold up in the gas phase rather than in a water column.
FAQ
Explore faq details to support your evaluation.
Common questions from buyers screening activated carbon for flue gas treatment, covering grade selection, key vapour-phase indicators and inquiry preparation.
What information helps you recommend a flue gas activated carbon grade?
Share the gas stream to be treated, expected flow rate, contaminant concentration, operating temperature, moisture level and target outlet limit. Tell us whether the duty involves SO₂, NOx, dioxins, mercury or solvent vapour, and confirm the required particle size and quantity. We then match the grade, particle size and specification plan, and confirm the batch values before quotation.
Which specifications matter most when screening grades for flue gas duty?
For vapour-phase service, look at iodine value, CTC adsorption and BET surface area together with the particle size distribution. Our planning range covers iodine value 500–1100 mg/g, CTC adsorption 35–95%, BET surface area 650–1000 m²/g and particle size 4–40 mesh. These are series reference ranges, not a guarantee for every batch; the agreed values are confirmed before order.
How does particle size affect pressure drop and adsorption in a gas stream?
Finer particles shorten the diffusion path and can improve adsorption kinetics, but they also raise pressure drop across the bed. Coarser granular grades reduce pressure drop and suit high-flow ducts where capture per pass is less critical. The 4–40 mesh range can be screened to your vessel design, and the exact cut is confirmed against the order.
What about moisture, ash and bulk density for vessel planning?
As-supplied moisture is referenced at 8% or below, ash at 8–20%, pH 7–11 and bulk density 0.5–0.65 g/cm³. Bulk density helps estimate fill volume and vessel weight; ash and pH indicate the general chemical character of the grade. All values are batch-confirmed, and the SDS or a sample report covers only the material it describes.
Which documents can be discussed before a flue gas carbon order?
We follow a documented service flow: review the application and grade, state the scope of the specifications and references, then agree packaging and moisture-protection requirements when the order is confirmed. Price, available quantity and lead time are verified by our team against a written quotation or order. Specific batch indicators and available files are confirmed before the transaction.