Coal-Based Granular Activated Carbon
High Adsorption Capacity Coal-Based Granular Activated Carbon for Water and Process Purification
This coal-based granular activated carbon is designed for duties where adsorption capacity drives the choice. A dense coal structure supports fixed beds, while steam activation opens the pore network that captures colour, odour and dissolved organics. Declared minima cover iodine value, methylene blue adsorption, surface area and hardness. Share your medium, flow and target, and we will confirm the suitable grade.
Compare iodine value, methylene blue adsorption, surface area and hardness against your treatment goal. Batch values are confirmed in the quotation.
- Iodine value
- ≥ 900 mg/g
- Methylene blue adsorption
- ≥ 135 mg/g
- BET surface area
- ≥ 900 m²/g
DESCRIPTION
Explore description details to support your evaluation.
This coal-based granular activated carbon is built for duties where adsorption capacity drives the selection. Coal gives the material a dense, durable structure suited to fixed beds, while steam activation develops the internal pore network that captures colour, odour and dissolved organic compounds from water and process streams. It is aimed at procurement and technical teams comparing carbons for municipal water, industrial process purification and general organics removal.
How capacity is expressed
Capacity is not one number. Iodine value reflects micropore development for small molecules, methylene blue adsorption reflects capacity for coloured and larger organic species, BET surface area describes the extent of internal surface, and CTC adsorption adds a vapour-phase reference. Read together, they give a clearer picture than any single headline figure, since strength in one measure does not guarantee strength in another. Declared minima and measured batch values are confirmed before quotation.
Choosing the cut and duty
Granular form suits beds that must be backwashed, regenerated or cycled repeatedly, and where pressure drop across a fixed vessel matters. Particle size should match vessel design and flow rate: a finer cut can offer faster kinetics but raises pressure drop, while a coarser cut lowers it at the cost of slower uptake. Contact time, inlet concentration, target residual and the adsorbate all affect service life, so strong performance in one duty does not mean a carbon is the best choice in another.
To discuss suitability, send an inquiry describing the medium, contaminants and inlet concentration, target residual, flow rate and contact time, preferred mesh cut, and quantity for the first charge. Our team will review the application and confirm the applicable batch specifications before any commercial terms are agreed. Price, available quantity and delivery timing are confirmed in a written quotation or order.
SPECIFICATIONS
Explore specifications details to support your evaluation.
Values below are the frozen selection for this grade. Batch figures and supporting documents are confirmed before quotation; other mesh cuts are reviewed against the inquiry.
| Iodine value | ≥ 900 mg/g |
|---|---|
| Methylene blue adsorption | ≥ 135 mg/g |
| BET surface area | ≥ 900 m²/g |
| CTC adsorption | 50 – 90 % |
| Ash content | 8 – 15 % |
| Moisture | ≤ 5 % |
| Hardness | ≥ 92 % |
| Bulk density | 0.5 – 0.65 g/cm³ |
| pH value | 7 – 10 |
| Particle size | 8 – 30 目 |
ADVANTAGES
Explore advantages details to support your evaluation.
Why this coal-based granular grade suits adsorption duty in water and process streams.
High iodine value for broad micropore adsorption
An iodine value floor of 900 mg/g supports uptake of small dissolved organics, making this coal-based granular carbon a practical starting point for water and process purification duty.
900 mg/g iodine value floor
OUR COMMITMENTS
Six Reasons Industrial Buyers Trust Sanniu Carbon
How inquiries are handled, from scoping the duty through to order confirmation and after-sales follow-up.
Application review before any selection advice
We start by checking your treatment target, the medium being processed, product form and expected operating conditions, then discuss a suitable grade and direction.
Scope of quoted specifications stated clearly
Iodine value, moisture, hardness and particle size are tied to the batch and the method used. Batch values and available documents are confirmed before the transaction.
Packing and moisture protection agreed at order stage
Bag type, bulk-bag size and moisture-control requirements such as inner liners or desiccants are reviewed when the order is confirmed, per the agreed order details.
Price, quantity and lead time confirmed in writing
Commercial terms are verified by our team and only become binding through the written quotation or order both sides confirm. No figure is fixed by this page.
Contact channel kept open after delivery
Questions about handling, storage or documents can be raised through the agreed contact channel and are followed up after delivery.
CREDENTIALS
Explore credentials details to support your evaluation.
ISO 9001:2015
Registrati0n No: 06524Q01338R0S
Certificate of Analysis
B-R2409C3836
Certificate of Analysis
Report No. A2260506150101001
Certificate of Analysis
No. 1621112086
Certificate of Analysis
NO.250100320443888
Certificate of Analysis
NO. 1524070087
PACKAGING
Explore packaging details to support your evaluation.
Packing options for coal-based granular activated carbon, with moisture protection confirmed against your order.
25 kg PE-lined export bag
Standard export bag with a PE inner liner, palletised for container loading and suited to smaller vessels or trial quantities.
25 kg per bag
500 kg or 1000 kg bulk bag
Bulk bags for larger fixed beds and higher-volume dosing, reducing handling steps and dust during filling.
500 kg or 1000 kg bulk bags
Heat-treated export pallets
Heat-treated pallets can be supplied for export markets, with the relevant documentation arranged alongside the shipment.
ISPM-15 heat-treated pallet
Moisture-control packing for humid routes
Desiccant or vacuum-style protection can be discussed for humid shipping routes, with the final arrangement fixed in the confirmed order.
On request, per order
Custom bag marking and labelling
Custom printed bags and private labelling can be reviewed against your order, subject to the agreed artwork and quantity.
Custom artwork on request
PROCESS
Explore process details to support your evaluation.
Inquiry handling follows a clear sequence so that selection and commercial terms rest on confirmed application details and batch data.
Review application and target
Share the medium, flow or concentration, target specification, particle size and planned quantity so the duty can be assessed.
Agree the selection basis
We compare the stated duty with the grade's iodine value, methylene blue adsorption and surface area, and confirm the applicable specification.
Confirm batch data and documents
The batch certificate and available documents are checked against the agreed specification before any quotation is issued.
Settle packaging and order details
Packaging format, moisture protection and delivery terms are agreed in the written order confirmation.
Support after delivery
Use or documentation questions raised after delivery are received through the agreed contact channel and followed up.
DIMENSIONS
Explore dimensions details to support your evaluation.
A coal-based granular carbon built for high adsorption duty, combining a 900 mg/g iodine floor with 92% hardness so fixed beds hold capacity through repeated backwash cycles.
Product form
Coal-based granular activated carbon
Granular activated carbon produced from coal, screened to a defined particle size range for fixed beds and continuous water treatment columns.
Application
Water treatment
Activated carbon selection for water polishing, colour and odour control. Share the water analysis and treatment targets.
FAQ
Explore faq details to support your evaluation.
Common questions from buyers comparing a high-adsorption coal-based granular grade, covering selection, batch figures and inquiry details.
Which applications suit this high-adsorption coal-based granular carbon?
It is intended for water and process purification duties where a high iodine value and surface area matter, such as decolourising, organics removal and fixed-bed polishing. Because the grade is granular, it fits backwashed beds and vessels where pressure drop and attrition are concerns. Share your medium, flow rate or concentration and target specification, and we will confirm whether this grade or another activated carbon series is the better starting point.
What do the iodine value and methylene blue figures tell a buyer?
The selected specification plan sets an iodine value of at least 900 mg/g and methylene blue adsorption of at least 135 mg/g, with a BET surface area reference of at least 900 m²/g. These are selection indicators, not a performance guarantee for every duty. The batch value is confirmed before quotation, and the agreed specification plan governs the transaction rather than an industry reference range.
How should I choose the particle size and confirm bed behaviour?
The screen cut is 8 to 30 mesh, and other cuts are reviewed against the inquiry. Particle size affects pressure drop and backwash behaviour, so tell us your vessel type, bed depth and permitted pressure drop. Hardness is specified at a minimum of 92% to limit attrition in backwashed fixed beds, and bulk density is given as a reference range of 0.5 to 0.65 g/cm³ for bed volume and vessel loading calculations.
Can I see the batch figures before placing an order?
Yes. The specification plan lists reference ranges and limits, including moisture, ash content, pH of the water extract and CTC adsorption. Actual batch values are confirmed before quotation, and the specific batch indicators and available documents are agreed before the transaction. Ask for the figures for the grade and cut you are considering so you can compare them with your own acceptance criteria.
What should I include in an inquiry, and which documents are available?
Describe the medium to be treated, flow rate or concentration, target specification, required particle size and purchase quantity. We check the use case and product form, then discuss the selection direction and the scope of the quoted specification and documents. Business terms such as price, available quantity and delivery are confirmed by our team in a written quotation or order. Sample inspection reports cover the tested samples only and are not a certification of the full range.