Body

Explore body details to support your evaluation.

Paint operations in furniture, machinery and vehicle repair emit benzene compounds, esters and ketones requiring suitable treatment. Buyers often compare pellets and spheres, but choosing by appearance alone overlooks pores, density, resistance and operating fit. This guide compares physical properties, loading, replacement and total cost for Quzhou users.

Honeycomb carbon blocks arranged on storage racks

Paint gases often combine high flow, dilute organics and humidity. The source’s solvent-paint example has toluene/xylene above 60%, gas at 20–40°C and humidity above 60%; actual coatings vary. Pellets can use coal or wood and develop pores according to manufacture. A pore example of 1.5–2.5 nm is not a universal shape property or proof of molecular fit. Spheres may use pitch or resin and offer smooth, strong particles, but neither pores nor benzene capacity can be ranked by shape alone. Compare actual feedstock, activation and dynamic tests.

Blue and white bagged goods stacked on workshop pallets

Bed resistance affects fan flow and capture. Regular pellets can provide even gaps, but residual paint mist coats either medium and raises pressure. Spheres can offer favourable packing and flow under suitable conditions. A 15–20% pressure-loss reduction is a comparison example, not a universal result: calculate using size, voidage, depth and velocity. Verify fan energy, breakthrough and changeout under the actual duty.

Bagged activated carbon inventory in a daylit warehouse

Iodine alone is insufficient. It is a model-adsorbate reference, not a capacity test for every species below 1 nm. Molecular-size examples of 0.67 nm for toluene and 0.71 nm for xylene require confirmation of source, isomer and calculation convention. Mixed gases still need suitable access pores. CTC or benzene tests add useful references, but do not replace actual-gas capacity. Example Sanniu pellet specifications include iodine 800–1000 mg/g, CTC above 60% and benzene uptake at or above 35%, to be verified for the specific grade.

After wet-curtain treatment, humidity may exceed 70%, allowing water to compete for pores. Moisture below 5% can be a purchasing reference subject to the applicable product standard and contract; material at 8–10% can behave differently. Strength examples above 95% for pellets or 98% for spheres must use agreed test methods. Weak carbon generates fines during loading and changeout, affecting equipment and waste handling.

Example bulk densities are pellets 450–550 g/L and spheres 400–480 g/L. These change mass per bed volume, but total working capacity also depends on dynamic uptake per mass. Appropriate spheres can offer responsive cycling in some variable-flow systems; suitable pellets may fit stable duties. Compare actual cycle tests rather than assume spheres universally retain more capacity. Some Quzhou plants switch between adsorption and regeneration beds.

Check each engineering and product requirement separately. Iodine 800 mg/g, surface area 750 m²/g and CTC 60% must not be attributed together as universal clauses of the adsorption engineering specification. It also gives relevant inlet-temperature and particulate guidance, including below 40°C and approximately 1 mg/m³, subject to the applicable clause. Effective paint-mist filtration remains essential. Provide flow, temperature, humidity, species and pretreatment information when selecting the form.

Adsorption concentration with catalytic treatment increases interest in cycle and thermal stability. A desorption-temperature example not exceeding 120°C needs validation against the actual carbon, solvent and safety design; it is not a general operating guarantee. Spheres can offer handling advantages in appropriate moving/fluidized beds. Future selection should be based on gases and operation rather than shape labels.

Check batch testing and technical recommendations as well as price. Sanniu covers wood, coconut and coal, with example size ranges of 2–4 mm, 3–5 mm and 4–6 mm. Iodine, strength, moisture and ash can be matched to the duty. Retain batch reports and samples for comparison if performance changes. Carbon selection is one part of a complete paint-gas system.

Dimensions

Explore dimensions details to support your evaluation.

Application

Air and gas purification

Odour control, solvent recovery and flue gas treatment, where the carbon has to hold up in the gas phase rather than in a water column.